Underbed gas tank

[hotrodharley]

i know this has been discussed to death but here we go..i want a spefic answer and pics;;i have a 64 chevy truck[long bed]fleetside;;need to move tank to rear under bed..truck already painted and new wood already installed and bed mounted..i only want to know if there is any gas tanks that i can mount under bed that doesn't hang down very low[trk has drop kit]and i can come out behind lincence plate[rool pan]..do not want fill inside bed splashing gas on my new nice wood and paint job has flake and pearl in it so not able to match so don't want fill on bed side..ONLY BEHIND PLATE[if it can be done...don't care for how many gallons it holds[don]t need to drive any long ways to need big fuel supply]..low budget so no custom built or expensive alumium tanks please..need pics please

[dallas71]

not sure if this will help....but check out this link
http://67-72chevytrucks.com/vboard/s...s+tank+mustang

[65Gregg]

There have been several posts where early Mustang/Falcon/Cougar tanks have been used. IIRC the tank flange is the same as the frame rail or very close which allows the tank to sit andmount on top of the rails. There are also some posts that use Camaro tanks. These were all rear fill.

[1Bad62Pro/Street]

63-66 Rear Mount Gas Tank Set - Steel/Rear Mount Underbed - Aluminum
http://www.brotherstrucks.com/products.asp?dept=1018

Chevy Truck Gas Tank, Aluminum, Bed Fill, 1963-1972 Part # 129016
http://www.ecklerstrucks.com/fuel-systems.html?limit=96

[hotrodharley]

Originally Posted by 1Bad62Pro/Street

63-66 Rear Mount Gas Tank Set - Steel/Rear Mount Underbed - Aluminum
http://www.brotherstrucks.com/products.asp?dept=1018

Chevy Truck Gas Tank, Aluminum, Bed Fill, 1963-1972 Part # 129016
http://www.ecklerstrucks.com/fuel-systems.html?limit=96

checked these out already..won't work..has side fill and hangs way down past roll pan;;need to keep above roll pan and rear fill so can come out behind licence pl;ate;;;side fill as these kits i'd need to cut side of bed for fill and as i said..have new paint job and don't want to miss up paint job

[TopFuel1966]

You can use a tank that fills behind the license plate but you're gonna have gas splashing on you roll pan and your shoes.

[hotrodharley]

Originally Posted by TopFuel1966

You can use a tank that fills behind the license plate but you're gonna have gas splashing on you roll pan and your shoes.

that i can deal with more then having all over the walnut wood inside bed..just fill up slow and be adware of splash..just need a tank that will work this way

[1Bad62Pro/Street]

Well, these links may or maynot help ya Bud.

http://www.boydwelding.com/tank-gallery

http://www.jegs.com/webapp/wcs/store...rm=Fuel+Cells+

http://www.summitracing.com/search/P...l&kr=fuel+cell

http://www.classicperform.com/6092chevtrk.htm#50

http://www.classicperform.com/tech_a...-It/Gas-It.htm

[Clyde65]

I saw somewhere here where someone installed an A or G body tank, I'll look.....

is yours a stepper?
http://67-72chevytrucks.com/vboard/s...d.php?t=390279

69 Camaro tank install, fill behind license plate.

http://67-72chevytrucks.com/vboard/s...d.php?t=448431

[hotrodharley]

Originally Posted by Clyde65

I saw somewhere here where someone installed an A or G body tank, I'll look.....

is yours a stepper?
http://67-72chevytrucks.com/vboard/s...d.php?t=390279

69 Camaro tank install, fill behind license plate.

http://67-72chevytrucks.com/vboard/s...d.php?t=448431

this is what i'm talking about;;just might work..only differance is i have roll pan instead of bumper but looks as bumper is same location as the roll pan;;i have fleetside..thanks

[ljackson]

Take a look in http://67-72chevytrucks.com/vboard/s...d.php?t=428182. There is a search link there. I built my tank. A drawing is in post #4. I have the fill going in the top of the tank. Maybe you could put it in the side.

[lakeroadster]

I have not seen any tank threads that would meet your specifications.

Might I suggest you post a picture of your truck? Kind of depends what style roll pan you have, if your truck is a fleetside or a stepside and where the license plate mounts in that roll pan.

I was really concerned about the tank hanging low and used an unconventional tank to make sure it didn't. I also am running a roll pan with a license plate in it.



You can see the steel gray tank in this photo peaking out beneath the roll pan. If I was to install a filler neck behind the license plate there would be nearly no slope in the filler neck. The tank would only hold a about 4 inches of fuel which would equal at the most 4 gallons.

[k1rodeoboater]

click on the link in my sig...page 2 I believe has pics of the camaro tank on my truck

or just click here...

http://67-72chevytrucks.com/vboard/s...d.php?t=448386