anyone ever use CPP brake conversion lines?

[k1rodeoboater]

Anyone ever use CPP brake conversion lines for their disc brake conversion? Like a total <explative removed> tard I ordered the wrong part. I meant to order the conversion hoses which are the section below them. Damn their difficult to find parts website!!!!

So here are my questions

1.) Is this kit any good/worth using? (I.E. are the bends somewhat accurate, flares good, and correct lengths)

2.) Does it really use 73-87 brake hoses? (their tech said yes...but he also said 71, so I want a 2nd opinion)

3.) Where can I find brake line clips to mount the line to the frame/crossmember? (tech said that the lines are in the 73-87 location at the front of the crossmember not the 60-66 on the rear of the crossmember)

[oldtrux]

pretty sure there is athread on this topic somewhere.i ordered mine yesterday from inline tubing..already in!from what i understand it is the place to get them.ordered from don,super nice informative guy.got complete conversion lines and tees and fuel line in stainless 300 out the door.check out their website.they have fittings and clips to make your head spin.good luck .

[k1rodeoboater]

AFAIK the one I got just has the prebent lines. I haven't opened it up yet to check...probably should do that. I thought about returning it but the 20% restocking feel plus my dime to ship it back just isn't worth it.

I still need to get some clips for my frame anyways to run my fuel line from the rear to the front. My solution I have right now is...um...ghetto to say the least but it works. I'll give them a look. I'd like to get them locally if possible but mail order is my fall back

I'll start digging for that thread too. Thanks for the heads up on it.

[rbar]

I bought a kit from CPP as well. It was drop shipped as well. I bought some nice ss fuel line and clips that I had to drill and tap the frame for 10-32. Turns out very nice that way. 3/8 fuel line from front to back at a local tubing place cost me $109 and I had to bend it. I also put a connecter in the middle so you can get it in the frame after its bent.
Posted via Mobile Device