Cut a coil - The 1947 - Present Chevrolet & GMC Truck Message Board Network

onedayjake · 03-27-2011, 09:46 PM

So I finally replaced the worn out ball joints, pitman arm and idler arm on my Burb this weekend so I figured I'd cut a coil off of the springs while I was that far into it. I see if it settles in anymore before I decide if I want to do anything to the rear. I still need to align it so I don't know how it rides yet.
Before

After

68Timber · 03-27-2011, 11:57 PM

Looks good!

69C20CUSTOM · 04-03-2011, 04:59 PM

It looks good to me.

03-27-2011, 09:46 PM	#1
onedayjake Registered User Join Date: Mar 2007 Location: NE Posts: 105	Cut a coil So I finally replaced the worn out ball joints, pitman arm and idler arm on my Burb this weekend so I figured I'd cut a coil off of the springs while I was that far into it. I see if it settles in anymore before I decide if I want to do anything to the rear. I still need to align it so I don't know how it rides yet. Before After __________________ 1947 1/2 ton, 5.3, 4L60E, 10 bolt 1974 Jimmy, 4 inch lift, 35" Thornbirds sold

03-27-2011, 11:57 PM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: Cut a coil Looks good! __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

04-03-2011, 04:59 PM	#3
69C20CUSTOM Registered User Join Date: Apr 2007 Location: Kansas City Posts: 176	Re: Cut a coil It looks good to me. __________________ 2003 Nissan Frontier Crewcab 4x4-Daily 1982 Chevy Suburban 3/4ton 4x4, Mud Toy Lookin for a C10

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.