Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-28-2011, 09:21 AM | #1 |
Registered User
Join Date: Jan 2011
Location: Silverdale, WA
Posts: 59
|
Galvanized sheet metal?
I've got an 83 diesel Jimmy that I bought approx 20 years ago totaled with a hit to the left front. I pulled the front clip as well as engine/trans and had the frame straightened then put it all back together with a new front clip.
Now 20 years later I was looking at several new trucks, but have decided to stay with the Jimmy or something of the same style and a bit newer. So the question is -- in the later years did GM start using more galvanized sheet metal? If so, when was the changeover? I see several Blazers on C/L locally from 83 to 90 for a reasonable price (at least from the pix/description). It may be be advantageous to get a newer one, rather than stay with the '83. |
04-03-2011, 11:56 PM | #2 |
Registered User
Join Date: Jan 2006
Location: Seattle WA
Posts: 505
|
Re: Galvanized sheet metal?
I read 1990 was the first year for galvanized sheet metal. There's a couple nice ones around here if you want to spend the money. Most are pretty beat up, but I think the prices are fair and reflect it.
__________________
Curry in a Hurry: SB rebuild for my 71 C20 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|