Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-21-2011, 03:56 PM | #1 |
Registered User
Join Date: Nov 2007
Location: verona, WI
Posts: 123
|
factory speaker question..
This is prolly a stupid question but i need some help... Im planning on putting two 4" speakers where the factory speaker went... but i cant find where the original speaker was mounted. if somebody could please help explain where it was mounted it be a great help. a picture would be even better. thank you much
|
04-21-2011, 06:33 PM | #2 |
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: factory speaker question..
There was a pressed steel bracket, that was held in place with two screws, that faced the inside of the cab, under the windshield weatherstrip , where the dash is spot welded to the cowl. There was also a rubber bumper attached to the speaker bracket that rests on the radio. The radio had a bracket that bolted to the cowl as well as the radio. The speaker magnet protruded through the bracket, the top of the speaker has a foam gasket that contacts underneath the dash where the speaker grill is visible.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
04-22-2011, 02:05 PM | #3 |
Registered User
Join Date: Nov 2007
Location: verona, WI
Posts: 123
|
Re: factory speaker question..
Thanks much!
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|