TX Cheyenne Tailgate panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 04-24-2011, 09:15 PM

Here is a Cheyenne Trim level tailgate panel. It is not NOS as it was installed on one of my trucks at one time . It was NOS when I bought it but that has been a few years back. The mounting tabs on the backside are surface rusty but the panel is nice. I cant find the mounting bolts but will continue to look . I would rate this a strong 8 on a scale of 1-10 and I am picky. $100 takes it . I will have to check shipping to make sure it is not oversize. If it will go standard UPS I will ship it for $20 in the lower 48 cont. US states.
Thanks,
Frank

*Stitch* · 04-24-2011, 10:16 PM

how long is it...if it fits my tailgate consider it sold...

f.monroe · 04-24-2011, 11:08 PM

I will measure it tomorrow. It is a 77,78,79,and 80 model Cheyenne trim panel . I do not know if the gates are different in the center after 80 or not.
I will let you know .
Frank

*Stitch* · 04-25-2011, 07:26 AM

I have another gate that's older. I got the older gate because the gate on the truck has a huge dent in it. I'm 99% sure it'll fit the older gate. Just want to make sure
Posted via Mobile Device

f.monroe · 04-25-2011, 09:18 PM

I measured it just now . I measured to the outside of the piece in both length and width. It measures 62"x 4 3/16" . Let me know . I checked UPS and it will be oversize because any package that is over 60 inches long is considered oversize . I checked shipping to California just as a reference and it shows approx $34 to ship with insurance . I guess it will be about $130 shipped .If you have a specific address you want to check shipping on I used 66x6x4 as reference measurements and 15 lbs. I wouldd ship in my own packaging and pay the fees at a UPS shipping store from 77808. Be sure to check whether it goes to a residential or business addy and it will give you a good quote . Let me know . Stitch is up first .
Frank

*Stitch* · 04-25-2011, 09:33 PM

It's good. I'll pm you my shipping address. Thanks Frank
Posted via Mobile Device

*Stitch* · 04-25-2011, 09:58 PM

Paypal sent. Thanks again Frank
Posted via Mobile Device

**N2TRUX** · 04-27-2011, 11:19 PM

Frank- You might consider using PVC pipe to ship it in. I have had good results with that over any other method of protection.

Prong · 04-28-2011, 07:38 PM

Another packaging option are those Quikrete round concrete form "tubes" you can get at Lowe's or Home Depot. They work well.

04-24-2011, 09:15 PM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Cheyenne Tailgate panel Here is a Cheyenne Trim level tailgate panel. It is not NOS as it was installed on one of my trucks at one time . It was NOS when I bought it but that has been a few years back. The mounting tabs on the backside are surface rusty but the panel is nice. I cant find the mounting bolts but will continue to look . I would rate this a strong 8 on a scale of 1-10 and I am picky. $100 takes it . I will have to check shipping to make sure it is not oversize. If it will go standard UPS I will ship it for $20 in the lower 48 cont. US states. Thanks, Frank Attached Images __________________ Born and proudly residing in a Red State !

04-24-2011, 10:16 PM	#2
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Cheyenne Tailgate panel how long is it...if it fits my tailgate consider it sold...

04-24-2011, 11:08 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Cheyenne Tailgate panel I will measure it tomorrow. It is a 77,78,79,and 80 model Cheyenne trim panel . I do not know if the gates are different in the center after 80 or not. I will let you know . Frank __________________ Born and proudly residing in a Red State !

04-25-2011, 07:26 AM	#4
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Cheyenne Tailgate panel I have another gate that's older. I got the older gate because the gate on the truck has a huge dent in it. I'm 99% sure it'll fit the older gate. Just want to make sure Posted via Mobile Device Last edited by Stitch; 04-25-2011 at 07:27 AM.

04-25-2011, 09:18 PM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Cheyenne Tailgate panel I measured it just now . I measured to the outside of the piece in both length and width. It measures 62"x 4 3/16" . Let me know . I checked UPS and it will be oversize because any package that is over 60 inches long is considered oversize . I checked shipping to California just as a reference and it shows approx $34 to ship with insurance . I guess it will be about $130 shipped .If you have a specific address you want to check shipping on I used 66x6x4 as reference measurements and 15 lbs. I wouldd ship in my own packaging and pay the fees at a UPS shipping store from 77808. Be sure to check whether it goes to a residential or business addy and it will give you a good quote . Let me know . Stitch is up first . Frank __________________ Born and proudly residing in a Red State ! Last edited by f.monroe; 04-25-2011 at 09:30 PM.

04-25-2011, 09:33 PM	#6
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Cheyenne Tailgate panel It's good. I'll pm you my shipping address. Thanks Frank Posted via Mobile Device Last edited by Stitch; 04-25-2011 at 09:39 PM.

04-25-2011, 09:58 PM	#7
Stitch Account Suspended Join Date: Jul 2008 Location: Where I come from, it's cornbread and chicken... Posts: 3,122	Re: Cheyenne Tailgate panel Paypal sent. Thanks again Frank Posted via Mobile Device

04-27-2011, 11:19 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Cheyenne Tailgate panel Frank- You might consider using PVC pipe to ship it in. I have had good results with that over any other method of protection. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

04-28-2011, 07:38 PM	#9
Prong Registered User Join Date: May 2007 Location: CO Posts: 475	Re: Cheyenne Tailgate panel Another packaging option are those Quikrete round concrete form "tubes" you can get at Lowe's or Home Depot. They work well.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.