Ujoints

[cfan10]

How hard is it to change ujoints w/bed off, meaning what tools will I need to do the job right. Thanks for advice.
Posted via Mobile Device

[1tonchevy]

Originally Posted by cfan10

How hard is it to change ujoints w/bed off, meaning what tools will I need to do the job right. Thanks for advice.
Posted via Mobile Device

it's easy to do with the bed on. so easier with the bed off. is yours a 2 peice or one peice drive shaft?

tools:
hammer,wrechces,sockets and i think thats about it. and a vise

[cfan10]

its a 85 dually with 6.2 turbo 400
Posted via Mobile Device

[KQQL IT]

Originally Posted by cfan10

its a 85 dually with 6.2 turbo 400
Posted via Mobile Device

3x 1350series u joint and some patience

p/n U Joint, 1350 Series 5-178x

[1tonchevy]

Originally Posted by cfan10

its a 85 dually with 6.2 turbo 400
Posted via Mobile Device

So it's most likly a 2 peice shaft. you will have to unbolt the hanger bearing as it's part of the shaft.

might as well put a new hanger bearing on while your at it.