New springs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ratfreak8871 · 06-26-2011, 05:33 PM

Hello all, put new coils in front now upper bump stop on drivers side touching, pass. side about 1/2 in. What am i missing here?

**lolife99** · 06-30-2011, 05:16 AM

I would check to see that the springs are seated correctly in the upper spring pocket.

ratfreak8871 · 06-30-2011, 04:57 PM

Thanks Keith, will do soon as i drop the rear 2" im pulling them out to cut them down so i will check.

06-26-2011, 05:33 PM	#1
ratfreak8871 Registered User Join Date: May 2007 Location: ALTON, IL. Posts: 98	New springs Hello all, put new coils in front now upper bump stop on drivers side touching, pass. side about 1/2 in. What am i missing here?

06-30-2011, 05:16 AM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: New springs I would check to see that the springs are seated correctly in the upper spring pocket. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

06-30-2011, 04:57 PM	#3
ratfreak8871 Registered User Join Date: May 2007 Location: ALTON, IL. Posts: 98	Re: New springs Thanks Keith, will do soon as i drop the rear 2" im pulling them out to cut them down so i will check.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.