MO 1971 Chevy Suburban 3/4 ton 4x4 project - parting out

[leakyfawcett]

I have had this project for a year and a half or so, and just really have too many other projects. This one, as much as I hate to say it, is in the way (I only have a 2-car garage). I've bought up many of the parts I need to finish this.

I have a complete 6.2 diesel with 700r4 tranny and transfer case from a 1989 Blazer that runs and shifts great.

Complete seat set from a 2003 crew cab chevy truck (plus a spare front seat from a 2003 regular cab).

Brand new wheels and tires (255/75r17 - roughly 32"), Goodyear all terrains.

3/4 ton axles, rear has new spider and side gears, and all new brake hardware including drums, shoes, cylinders, etc.

New steel repro gas tank.

I also have two front clips for it a 1971 and a 1967.

I have one extra drivers door, and lots of new sheet metal and patch panels including rockers, a drivers door skin, the rear taillight panel, both rear wheel arches, and a few other odds and ends.

I'd love for it to all go at once, so make me an offer. I'd at least like to sell the body/frame as a single unit. Otherwise, I'm entertaining offers on individual pieces.

See my local CL ad: http://stlouis.craigslist.org/cto/2442054469.html

Any my blog, which has lots of photos and info: http://www.1971chevysuburban.com/

I am in the St. Louis, MO area.

Any questions, lemme know. Thanks!

[capev86]

IF you part it out, i want the jack, wrench, spare tire holder and any associated hardware!

[1mitch4]

interested in a complete 71 grille and the gas tank I'm about 3 hours south of you near Houston, MO.

[1mitch4]

Don't need the grille, went another direction, thanks!