Guess what I got back today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captkaos** · 04-06-2003, 08:55 PM

Straight off the digital camera to you eyes. PROOF that I do occassionally work on my trucks, I got these back today from my painter. For some reason I have really been motivated. Timing cover is missing and balancer is not "on" because a new cam will be installed, along with a Fluidampr. I am only a couple parts away from setting it in the frame to run the rest of the fuel lines! Slowly but surely I am getting there.

http://www.captkaoscustoms.com/images/paintedeng.jpg
http://www.captkaoscustoms.com/images/paintednash.jpg
http://www.captkaoscustoms.com/images/paintedparts.jpg

Cole's 87 · 04-06-2003, 09:27 PM

Looking good Chris

. About how much longer before you get to hear it run? Hell I was soooo impaciant when I built my engine I wanted to crank it up while it was still on the stand

Mike76251 · 04-06-2003, 09:56 PM

Looks great!!
It would look good in a speedboat or a T-Bucket!
That paint on that block is a good way to keep from having to buy a aluminum block too.
I have a nice set of 1/8" Swedgelock tubing benders laying around so throw it in the truck and head on up.
You are two or so hours away!

Blue Beard · 04-06-2003, 10:24 PM

Looks good at this point, what the truck look like.....

**swervin ervin** · 04-06-2003, 10:31 PM

Quote:

Originally posted by Blue Beard
what the truck look like.....

Hehe. What truck? It's in about a million pieces. Real purdy frame though. LOL

Looks like someone decided to play a little. I for one, can't wait to see this engine sitting in something that resembles a truck. You and Ken have are way too patient. I can't stand it. I hate to wait for anything.

Looks good. When's the cam going in, and other stuff?

LOHRTBT · 04-06-2003, 10:54 PM

Lookin good!!

I like what I see so far

79BIG10 · 04-07-2003, 12:27 AM

Is this for the Blazer or Su? Looks good.

Ric83 · 04-07-2003, 12:28 AM

All I can say is WOW!! Looking real good

MSL · 04-07-2003, 03:20 AM

Dang that is sweet really good looking engine.

bigblock73 · 04-07-2003, 07:55 AM

Chris, looks awesome!

What color did you paint the engine? Is it powdercoated or paint?

-Jeff

BigRed · 04-07-2003, 08:39 AM

Looks awesome. Yes, tell us more about the paint.

Low87 · 04-07-2003, 09:23 AM

Niiiiiice! Greg likey!

*Randy70C-10* · 04-07-2003, 10:36 AM

That's insane.

TIMSPEED · 04-07-2003, 01:15 PM

Dude, that stuff is SICKENING!

Tom · 04-07-2003, 01:48 PM

new cam chris? Are you upping, down sizing, replacing with a new, same grind?

**Captkaos** · 04-07-2003, 03:48 PM

Thanks for the compliments guys. I really appreciate it.

Quote:

Originally posted by Cole's 87 About how much longer before you get to hear it run?

Well, about $1500 away. Still need the computer/harness/injectors/sensors/balancer/valvetrain/.....

Quote:

Originally posted by Mike76251 I have a nice set of 1/8" Swedgelock tubing benders laying around so throw it in the truck and head on up. You are two or so hours away!

Well the truck isn't a truck, it is just a rolling frame. Plus as you can see above, I am a little ways away from driving it.
Here is the latest pics of what it currently looks like.
http://www.captkaoscustoms.com/images/rolling_side.jpg
http://www.captkaoscustoms.com/images/12boltinstall.jpg

Quote:

Originally posted by swervin ervin It's in about a million pieces.
Looks good. When's the cam going in, and other stuff?

I think I am down to about 1000 pieces now

, but the other stuff is going on as soon as I decide, and as soon as I can get it here.

Quote:

Originally posted by 79BIG10 Is this for the Blazer or Su?

This would be for Su.

Quote:

Originally posted by bigblock73
What color did you paint the engine? Is it powdercoated or paint?
-Jeff

It is Silver metallic. Same color as some GM painted wheels. It is Basecoat/clearcoat over Epoxy primer (DP50)

Quote:

Originally posted by Tom
new cam chris? Are you upping, down sizing, replacing with a new, same grind?

Well I guess that is relative. I am going with a hydraulic roller. I am still trying to pick out the one I want, but it won't be "smaller" (less power) than the current, but I might move the power range around. Like I said, still thinking.

04-06-2003, 08:55 PM	#1
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Guess what I got back today Straight off the digital camera to you eyes. PROOF that I do occassionally work on my trucks, I got these back today from my painter. For some reason I have really been motivated. Timing cover is missing and balancer is not "on" because a new cam will be installed, along with a Fluidampr. I am only a couple parts away from setting it in the frame to run the rest of the fuel lines! Slowly but surely I am getting there. http://www.captkaoscustoms.com/images/paintedeng.jpg http://www.captkaoscustoms.com/images/paintednash.jpg http://www.captkaoscustoms.com/images/paintedparts.jpg __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-06-2003, 09:56 PM	#3
Mike76251 Senior Member Join Date: Mar 2003 Posts: 2,499	Looks great!! It would look good in a speedboat or a T-Bucket! That paint on that block is a good way to keep from having to buy a aluminum block too. I have a nice set of 1/8" Swedgelock tubing benders laying around so throw it in the truck and head on up. You are two or so hours away! Last edited by Mike76251; 04-06-2003 at 10:00 PM.

04-06-2003, 10:24 PM	#4
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Looks good at this point, what the truck look like..... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

04-06-2003, 10:54 PM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	Lookin good!! I like what I see so far __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

04-07-2003, 12:27 AM	#7
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,774	Is this for the Blazer or Su? Looks good. __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

04-06-2003, 09:27 PM	#2
Cole's 87 Registered User Join Date: Nov 2002 Posts: 272	Looking good Chris . About how much longer before you get to hear it run? Hell I was soooo impaciant when I built my engine I wanted to crank it up while it was still on the stand

04-07-2003, 12:28 AM	#8
Ric83 Registered User Join Date: Jan 2003 Location: Austin, TX Posts: 824	All I can say is WOW!! Looking real good __________________ Ric '83 Silverado SWB Fleetside Here she is

04-07-2003, 03:20 AM	#9
MSL Registered User Join Date: Mar 2003 Location: So.Oregon Posts: 765	Dang that is sweet really good looking engine.

04-07-2003, 07:55 AM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Chris, looks awesome! What color did you paint the engine? Is it powdercoated or paint? -Jeff

04-07-2003, 08:39 AM	#11
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Looks awesome. Yes, tell us more about the paint. __________________ Scott Shelbourne

04-07-2003, 09:23 AM	#12
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Niiiiiice! Greg likey! __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-07-2003, 10:36 AM	#13
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	That's insane.

04-07-2003, 01:15 PM	#14
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Dude, that stuff is SICKENING! __________________ I have a few cars... See Them Here

04-07-2003, 01:48 PM	#15
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	new cam chris? Are you upping, down sizing, replacing with a new, same grind? __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.