oil pan w/skid plate? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Low87 · 04-07-2003, 03:07 PM

Anyone remember these? I saw them several years ago advertised in Truckin magazine. They had oil pans and tranny pans were the bottom was a skid plate. My oil pan has a ding or two so if these are still available I'd like to find them.

Prerunner1982 · 04-07-2003, 03:10 PM

could get one made pretty easily.

Low87 · 04-07-2003, 03:27 PM

Yeah but these were pretty.

low 84 · 04-07-2003, 03:50 PM

http://www.jegs.com/cgi-bin/ncommerc...24&prmenbr=361

i doubt you'll ever hit your oil pan on anything but they do look cool

**Captkaos** · 04-07-2003, 04:09 PM

RoadSurfer (Bill Dermond) made these also. http://www.olywa.net/rdsrfr/

Low87 · 04-07-2003, 04:22 PM

Quote:

Originally posted by low 84
http://www.jegs.com/cgi-bin/ncommerc...24&prmenbr=361

i doubt you'll ever hit your oil pan on anything but they do look cool

LMAO, I'll take pictures for you this weekend.

**swervin ervin** · 04-07-2003, 04:23 PM

These are all TD Performance products.

Look in the dress up section under the slamgaurd pans. From what I understand, TD Performance is in the same level as Mr. Gasket as far as quality goes. In other words, buyer beware.

Oh, Summit sells all this junk, err.... I mean stuff.

Low87 · 04-07-2003, 04:28 PM

Chris and Ryan, thanks! That's what I was looking for!

Low87 · 04-07-2003, 04:30 PM

Thanks for the warning Mike. I just emailed the page that Chris posted, already had it returned undeliverable. I might just take my chances with something else.

**Captkaos** · 04-07-2003, 04:52 PM

You can reach Bill on Sportruck.com, his username is Bill@Roadsurfer

04-07-2003, 03:07 PM	#1
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	oil pan w/skid plate? Anyone remember these? I saw them several years ago advertised in Truckin magazine. They had oil pans and tranny pans were the bottom was a skid plate. My oil pan has a ding or two so if these are still available I'd like to find them. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-07-2003, 03:10 PM	#2
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	could get one made pretty easily. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call Last edited by Prerunner1982; 04-07-2003 at 03:15 PM.

04-07-2003, 03:27 PM	#3
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Yeah but these were pretty. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-07-2003, 03:50 PM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	http://www.jegs.com/cgi-bin/ncommerc...24&prmenbr=361 i doubt you'll ever hit your oil pan on anything but they do look cool __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

04-07-2003, 04:09 PM	#5
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	RoadSurfer (Bill Dermond) made these also. http://www.olywa.net/rdsrfr/ __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

04-07-2003, 04:23 PM	#7
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	These are all TD Performance products. Look in the dress up section under the slamgaurd pans. From what I understand, TD Performance is in the same level as Mr. Gasket as far as quality goes. In other words, buyer beware. Oh, Summit sells all this junk, err.... I mean stuff. __________________ Mike 1985 Chevy C-10

04-07-2003, 04:28 PM	#8
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Chris and Ryan, thanks! That's what I was looking for! __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-07-2003, 04:30 PM	#9
Low87 been here longer than Liz Join Date: Feb 2000 Location: Broken Arrow, OK Posts: 2,437	Thanks for the warning Mike. I just emailed the page that Chris posted, already had it returned undeliverable. I might just take my chances with something else. __________________ ~Greg~ Mac's Garage '87 SWB 6/8 drop "Piso" '08 CCSB Silverado DD the departed '89 GMC K5 Jimmy 4x4 "Rusty Nuts" '77 Chevy K5 Blazer 2wd '83 Chevy stepside "You get what you pay for" - Mike 'swervin ervin' Ervin

04-07-2003, 04:52 PM	#10
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	You can reach Bill on Sportruck.com, his username is Bill@Roadsurfer __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.