|
|
|
08-30-2011, 06:35 PM
|
#1 |
|
Registered User
Join Date: Nov 2008
Location: Rowlett, TX
Posts: 867
|
Raise a 66 GMC 2wd?
Do you suspension gurus have any knowledge if and how I can raise my 66 GMC truck. It is 2wd, and I don't wanna convert it to 4wd, just raise the ride height, or raise the body and frame from the wheels. Thanks for any help you can provide.
|
|
|
|
08-30-2011, 08:32 PM
|
#2 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Raise a 66 GMC 2wd?
Quote:
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
08-30-2011, 09:31 PM
|
#3 |
|
Registered User
Join Date: Nov 2008
Location: Rowlett, TX
Posts: 867
|
Re: Raise a 66 GMC 2wd?
I was thinking of about 2 to 4 inches.....wasn't really sure.
Posted via Mobile Device |
|
|
|
|
08-30-2011, 10:08 PM
|
#4 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Raise a 66 GMC 2wd?
Big block springs will raise it some (~2" max).
For more than that, you could go the lift spindle route for 4" lift but it takes all the required 'swap' parts to use them (lift spindles for an 88-98 1/2 ton GM). They aren't cheap though....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
08-31-2011, 12:01 AM
|
#5 |
|
Registered User
Join Date: Nov 2008
Location: Rowlett, TX
Posts: 867
|
Re: Raise a 66 GMC 2wd?
Scoti, can you tell me exactly what I would have to buy with the lift spindles to make this happen.
|
|
|
|
|
08-31-2011, 12:58 AM
|
#6 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,068
|
Re: Raise a 66 GMC 2wd?
Quote:
88-98 brake hoses 88-98 wheel bearings 88-98 upper/lower BJ's 67-87 3/4 ton lower a-arms You might also need outer tie-rods too. I'd have to research (re-read) to be 100% sure on them. Some info & answers for you.... http://67-72chevytrucks.com/vboard/s...d.php?t=469743
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
