The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-02-2011, 04:14 PM   #1
dmartin1
Registered User
 
dmartin1's Avatar
 
Join Date: Aug 2008
Location: mohave valley,arizona
Posts: 1,088
pondering before i get in over my head!

so ive been reading a lot on the lsx engine swaps and mpg threads lately.

i bought an 82 shortbed stepside lowered.


im really aiming to the 15-20 mpg range.

the lsx swap seems to be a good swap for power and fuel economy.Except ive been reading people have spent 5k+ on doing the swap!

If i were to do it,id just want a BONE STOCK 4.8 or so with a 700r4 or newer tranny.The engine/trannys go for around 800$ here with around 50-70,000 miles.

could this be done with confidence for under 2000$ including the engfine/tranny cost?

by reading ive found a lot of pre fabbed parts that are needed for the swap, and that if i know a descent amount of mechanics i can do this(me and my dad)...?
__________________
1969 Shortbed in progress
1982 short step, few suspension and motor upgrades.getting a 468
1978 Shortbed fleet side bonanza fully loaded
1978 k20 Silverado loaded.currently engine-less
1989 k10 suburban 9" lift
65 nova
And more
dmartin1 is offline   Reply With Quote
Old 10-02-2011, 09:55 PM   #2
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: pondering before i get in over my head!

Yours could be done cheaper, but... choose the 4.8/5.3 with the 4l60e. if you can find one at $800, then you can be close to $2k, but guess around $3K. you have to buy mounts, plates, headers/manifolds, harness, PCM(tune), exhaust and fuel delivery and drive shaft.

You can do it, but your gonna have to do everything, including the harness.

harness will be around 500.00, PCM tune 1-300.00, fuel around 300.00 ( some use a FI tank), headers around 600.00, mounts/plates around 250.00.

These are guesstimates and maybe lower or higher, also it depends on how you want to do it.
many guys here have done swaps on squares.
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 10-02-2011, 11:07 PM   #3
dmartin1
Registered User
 
dmartin1's Avatar
 
Join Date: Aug 2008
Location: mohave valley,arizona
Posts: 1,088
Re: pondering before i get in over my head!

well here at a local pick-a-part we have a thing called 10$ day.anything is 10$.ANYTHING.including core prices.

as well as 75% off day at another junkyard.so maybe i could be lucky enough to score the electrical at on of them if it aint too cut up.

i would really love the efi and newer engine for all around.

thanks for the response man.i gues its something to think long and hard about,for me anyways!
__________________
1969 Shortbed in progress
1982 short step, few suspension and motor upgrades.getting a 468
1978 Shortbed fleet side bonanza fully loaded
1978 k20 Silverado loaded.currently engine-less
1989 k10 suburban 9" lift
65 nova
And more
dmartin1 is offline   Reply With Quote
Old 10-03-2011, 08:43 AM   #4
harnalien
TruckincrazY
 
harnalien's Avatar
 
Join Date: May 2004
Location: Haslet, TX
Posts: 493
Re: pondering before i get in over my head!

I may just be a pessimist due to my trials and tribulations, but I'd plan on at least $$3500 by the time it's all said and done.
Posted via Mobile Device
__________________
My build thread - '84 2wd w/ a 6.0 swap
http://67-72chevytrucks.com/vboard/s...d.php?t=433595
harnalien is offline   Reply With Quote
Old 10-03-2011, 08:48 AM   #5
faribran
Registered User
 
Join Date: Jul 2005
Location: AL
Posts: 1,828
Re: pondering before i get in over my head!

harnalien, i call that being a REALIST...
__________________
"
faribran is offline   Reply With Quote
Old 10-03-2011, 11:19 AM   #6
usmcchevy
Has more rust than truck...
 
usmcchevy's Avatar
 
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
Re: pondering before i get in over my head!

Study this, LSx swap cost FAQ: http://67-72chevytrucks.com/vboard/s...d.php?t=473560

If you look at my swap cost, I tried to do it on the cheap and came out at $2700ish
Done for under 2k..........maybe.
__________________
1972 Custom/10 SWB, 4.8/4l80e
Build thread

LSx Swap FAQ index
usmcchevy is offline   Reply With Quote
Old 10-03-2011, 12:46 PM   #7
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
Re: pondering before i get in over my head!

The key is how much you get the motor/ trans for and what can you do yourself.

The swap cost FAQ is money for sure. the thing that gets us is looking at others swaps and going, ooooo, I could do that and oh $100 is that much more...stuff like that gets us all in trouble
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 10-09-2011, 01:54 PM   #8
misternash2
Registered User
 
Join Date: Dec 2009
Location: monett, mo
Posts: 230
Re: pondering before i get in over my head!

send me your number in a PM and when to call, i'll give you all the details on what i did. i did mine as cheap as practical. some things it's just better to spend the money on. i have right at 3k in mine. '04 5.3/4l60e
misternash2 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com