|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-13-2011, 08:06 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: South Carolina
Posts: 20
|
Rear wheel cylinder 63
OK so I'm replacing my rear brakes and wheel cylinders on a 63 c10. My question is do I need to remove the stud that the hardware hooks to at top of backing plate? Under the stud looks to be a bracket that needs to be removed to be able to pull wheel cylinder out. Is this correct? Thanks jd
Posted via Mobile Device |
|
|
|
12-13-2011, 08:10 PM
|
#2 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: Rear wheel cylinder 63
No the stud remains. Simply undo the two small bolts that retain the wheel cylinder to the backing plate. You might have to tap on the wheel cylinder to get it to release it from the backing plate.
|
|
|
|
|
12-13-2011, 08:19 PM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: South Carolina
Posts: 20
|
Re: Rear wheel cylinder 63
Great! Thnx alot...figured I would check with the more experienced before I went any further.....thanks
Posted via Mobile Device |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
