E-Brake Cable with dual exhausts

[masterlock]

Anyone have duals running straight back off headers? If so where are you running your E-brake cables? Pictures would be great if you have them.

[ringger14]

Im running duals off of long tube headers on my 84. Where are you needing the pictures? Of the whole travel of the lines or just under the cab?

[donut]

I don't have pics, but my 73 had duals off of headers. Pipes kicked up enough to allow e-brake cable room.

[masterlock]

the only issue is where the front cable goes, Is it under or over the exhaust are you using the original attachment point on the frame?

[donut]

On mine, the e-brake was in the stock location. Exhaust ran over the cable.
'73 K-20.

[maskale]

76 with long tube and dualed straight back.

I have my tubes run under the cable. no pics either.

It did take some playing around to get it all right.

HAve to find a compromise for the tube routing and the cables. Take as much slack as u can out of the calbes so they are not dragging on the tubes. Drive shaft also gets in the way.

[J Knight]

http://www.lmctruck.com/icatalog/cc/t.aspx?Page=166

You can convert to the 84-87 brake cables that run under the left hand frame rail.

[masterlock]

Ok same topic different question. I need to replace the front cable of the Ebrake system of cables. I have an 87 cab that Im putting on my 77 frame so which cable should I get from LMC (See Diagram)

[J Knight]

Possibly 34-3821, if the rest of your e-brake system is 77.