Pics for flashed, shawno72 & rpmgroup

[Classic Bowties]

Here are the two optional P13 fleetside in bed spare tire mounting brackets that I dug out, $40. each plus the cost of shipping. Mel

Per order of interest, 1st: flashed, 2nd: shawnlo72, 3rd: rpmgroup

[shawno72]

Thank you Mel but I'll pass.
Posted via Mobile Device

[drewskiren]

Can I get in line for one of these?

[Classic Bowties]

Originally Posted by Classic Bowties

Per order of interest, 1st: flashed, 2nd: shawnlo72, 3rd: rpmgroup

Originally Posted by drewskiren

Can I get in line for one of these?

Updated interest as of 1/24: flashed pm'ed an unwanted offer, shawnlo72 passed above in 2nd post & I haven't heard from rpmgroup since 1/21 @ 10:20. So they are both available yet and you can take your pic drewskiren. Let me know your ship to Zip and I can figure a total. Mel

[drewskiren]

it looks like the better of the 2 is the white one? You tell me. ship to 38119

[Classic Bowties]

Originally Posted by drewskiren

it looks like the better of the 2 is the white one? You tell me. ship to 38119

Fedex ground $18. to 38119, let me know if you want to send a postal moneyorder or if paypal is prefered, pm me your email address and I will send you an invoice. Mel

[flashed]

Bowties ,Im sorry if my offer offended you ,I was just looking at the same one from LMC mentioned above and considering my cost to have it blasted and painted to match.
John

[CrewCab59]

Mel,

Do you have any hardware to go with them ? Ship quote 37721

Thanks

[Classic Bowties]

Originally Posted by CrewCab59

Mel,

Do you have any hardware to go with them ? Ship quote 37721

Thanks

No harware was with either of these when they were removed from 70 & 72 trucks, I have only seen a couple of them with what I think is the correct threaded rod w/flat plate at one end, most guys just use a long 1/2" carriage bolt with a nut or wingnut. Cost for you would be $40. + $18. to Corryton Zip 37721. Mel

[CrewCab59]

Originally Posted by Classic Bowties

No harware was with either of these when they were removed from 70 & 72 trucks, I have only seen a couple of them with what I think is the correct threaded rod w/flat plate at one end, most guys just use a long 1/2" carriage bolt with a nut or wingnut. Cost for you would be $40. + $18. to Corryton Zip 37721. Mel

Mel, do you still have both of them? If so what payments?

Thanks

[landsurvey1]

It's really none of my business, but I thought I would put my .02 in. I used to have the LMC spare tire holder on my truck and it worked fine. With that said, it is not even close to the original spare tire holders I have on now. The ones I bought were in the same, maybe worse condition than the ones you guys are looking at. I went to the auto paint store and had them mix an aerosol rattle can with my paint code, it was $20.00. I went home and sanded the parts down, sprayed them with primer, paint and clear from a rattle can and installed. Then I went to Ace Hardware and bought a 6 inch carriage bolt with some washers and a nut, drilled a hole in a piece of angle iron and there you have it, an afternoons worth of time.

[Classic Bowties]

Originally Posted by CrewCab59

Mel, do you still have both of them? If so what payments?

Thanks

Yes, I have both of them yet and would do $90. for both of them shipped together to Corryton Zip 37721 by fedex ground, payment by USPS moneyorder or If you want to use paypal you can pm me an e-mail address and I will send you an invoice through pp. Mel

[Classic Bowties]

Originally Posted by drewskiren

Mel, I appreciate your efforts, but since the already powdercoated and ready to install one from LMC is $10 cheaper shipped than yours, it makes no sense to get yours unless it is more like $30 shipped. Let me know your thoughts.

Originally Posted by flashed

Bowties ,Im sorry if my offer offended you ,I was just looking at the same one from LMC mentioned above and considering my cost to have it blasted and painted to match.
John

Hey Guys, no offense was taken here I just cannot accept/end up with $12.-$15. after shipping a part that I only have a couple of and have gotten $40.-$50. for in years past. Lmc's p/n 38-3196 Taiwan piece will probably do each of you just fine @ $55. shipped, it looks like it could be built in the common weekender's garage and in my opinion will never be an equal replacement for the factory OE offered option #P13 piece while you can still find them. Mel