WANTED ( PULLYS FOR A 72 k10 ) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sigurd · 05-02-2003, 06:50 PM

Have cash, need them bad. Both water pump and balancer pully for a 72 K10 with a 350.

James

ride91x@aol.com

jeffspower · 05-02-2003, 07:24 PM

I have both of the crank pulleys here in my hand that were original on my 72 k-20 w/350. one runs the fan & alt, the other the p/s. Did not have a/c. I know i should have the fan pulley somewhere, I just have to find it.

-Jeff

sigurd · 05-05-2003, 09:14 AM

I still need these pullys, so so so bad.....

James

jeffspower · 05-05-2003, 10:12 AM

I ended up out of town all weekend but I will look for the other pulley this evening- Jeff

ljbear · 05-05-2003, 02:56 PM

James,

Would a set from a 71 with 350 work? I'm pretty sure I have them here.

Larry

bpmcgee · 05-05-2003, 03:37 PM

If no one has already helped you, I think I have a set from a 74 350 C10 that would work. I'll have to check the parts interchange manual.

Brian

jeffspower · 05-05-2003, 09:05 PM

I have found the wp pulley & sent you a pm.

sigurd · 05-06-2003, 09:49 PM

Good deal, thanks Jeff and all of the others that tried for me.

James

05-02-2003, 06:50 PM	#1
sigurd Registered User Join Date: Mar 2000 Location: San Diego, CA USA Posts: 344	WANTED ( PULLYS FOR A 72 k10 ) Have cash, need them bad. Both water pump and balancer pully for a 72 K10 with a 350. James ride91x@aol.com __________________ --------- 72 SWB K10 San Diego CA

05-05-2003, 09:14 AM	#3
sigurd Registered User Join Date: Mar 2000 Location: San Diego, CA USA Posts: 344	I still need these pullys, so so so bad..... James __________________ --------- 72 SWB K10 San Diego CA

05-05-2003, 02:56 PM	#5
ljbear Registered User Join Date: Jan 2003 Location: Emmett, Idaho Posts: 858	James, Would a set from a 71 with 350 work? I'm pretty sure I have them here. Larry __________________ Larry 72 Chevy SWB 4x4 71 Chevy SWB 4x4 My Work Truck "Don't confuse enthusiasm with capability"

05-06-2003, 09:49 PM	#8
sigurd Registered User Join Date: Mar 2000 Location: San Diego, CA USA Posts: 344	Good deal, thanks Jeff and all of the others that tried for me. James __________________ --------- 72 SWB K10 San Diego CA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-02-2003, 07:24 PM	#2
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	I have both of the crank pulleys here in my hand that were original on my 72 k-20 w/350. one runs the fan & alt, the other the p/s. Did not have a/c. I know i should have the fan pulley somewhere, I just have to find it. -Jeff

05-05-2003, 10:12 AM	#4
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	I ended up out of town all weekend but I will look for the other pulley this evening- Jeff

05-05-2003, 03:37 PM	#6
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	If no one has already helped you, I think I have a set from a 74 350 C10 that would work. I'll have to check the parts interchange manual. Brian

05-05-2003, 09:05 PM	#7
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	I have found the wp pulley & sent you a pm.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.