Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-04-2012, 08:16 PM | #1 |
Registered User
Join Date: Jul 2011
Location: bush louisiana
Posts: 213
|
fuel sending unit not working right
my gas tank was leaking in my 49 so i changed it now it shows full all the time, an i installed a ground to my cab just to make sure that it wasnt that, ive tried two sending units an both do the same, any help
|
03-05-2012, 12:01 AM | #2 |
Registered User
Join Date: Jun 2010
Location: WA.
Posts: 436
|
Re: fuel sending unit not working right
my 56 says 3/4 and when you sit on the seat it bounces to empty then full then sometimes it works ,, hahha and nothing is grounding out..maybe check the make sure the power wire is going to the + side wish i could out on that
|
03-05-2012, 06:07 PM | #3 |
Registered User
Join Date: Oct 2011
Location: Hebron, IN
Posts: 194
|
Re: fuel sending unit not working right
Is the float stuck? My internal float on my sending unit wasnt working, read the same thing all the time. Took it all apart and the little half round plastic float that moves up and down and sends signals to the gauge, was a little tight(wouldnt move up or down). So took the float out and sanded in down and now it works great.
__________________
Mom, I think I may have broke something. My tires keep spinning and leaving black marks every where |
03-05-2012, 08:00 PM | #4 |
Registered User
Join Date: Jul 2011
Location: bush louisiana
Posts: 213
|
Re: fuel sending unit not working right
i unhooked the wires off the tank an it still said full, so i went to the gauge an lo an behold the voltage reducer is shot, showin 12 volts on each side, dont that just suck, so ordered another one, i pray to god i dont have to take the cluster out an replace the gauge now, thanks for yaws advice
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|