SC Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

theastronaut · 05-29-2012, 08:55 PM

All parts are from a '66 C10. Will ship USPS parcel post, or priority if it's about the same price. Tracking number will be provided as well. All prices plus shipping. Will be shipping from 29625 zip.

Speaker and radio bracket. Cloth and cone are gone but frame and bracket are in good shape. Great for mounting a modern speaker. $35 plus shipping.

Wiper motor, three speed with washer. Untested. $35.00

Wiper linkage. Not in the best of shape but all there. $10.00.

Left and right visors with arms. Arms are in good condition, one board is missing a section. Patch and recover or just use the arms. $20.00

Gas tank straps. $5.00

Posted via Mobile Device

1963c-10 · 06-06-2012, 09:26 AM

How hard is the conversion from the one speed wiper to the 3 speed? I have a wiper/washer switch, but I think 1 or 2 speed was all chevy had in 63. Also...any wiring issues that you know of for the conversion?

theastronaut · 06-06-2012, 12:57 PM

Quote:

Originally Posted by 1963c-10

How hard is the conversion from the one speed wiper to the 3 speed? I have a wiper/washer switch, but I think 1 or 2 speed was all chevy had in 63. Also...any wiring issues that you know of for the conversion?

I've never done it before. The single speed has only one wire going to the switch, so I'm sure the wiring would have to be changed. I've got under-dash harness from the same truck still; I can check the wiper wiring when I get home.

theastronaut · 07-10-2012, 11:59 AM

Bump.
Posted via Mobile Device

**dean jendro** · 07-10-2012, 12:57 PM

John,
Do you still have the wiper motor? Pics if so?
Are the splines on the wiper arms good? Thanks,
Dean

theastronaut · 07-10-2012, 04:56 PM

Dean, I've still got both. The splines look good other than some overspray, and there's a chip on the edge of one.

**dean jendro** · 07-10-2012, 10:17 PM

Quote:

Originally Posted by theastronaut

Dean, I've still got both. The splines look good other than some overspray, and there's a chip on the edge of one.

Thanks John, I'll take wiper motor and both arms. PM me total shipped to 98321.
Dean

**pdxhall** · 07-11-2012, 01:12 AM

John, I'll take the both the visors unless you'll part with just the passenger side. Shipped to 97230.

Thanks, Brett

theastronaut · 07-11-2012, 08:27 AM

PM's sent!

theastronaut · 07-11-2012, 10:23 PM

Wiper motor and linkage arms are gone, passenger visor spoken for, and the other parts are still available.
Posted via Mobile Device

**pdxhall** · 07-24-2012, 08:28 PM

The visor/arm arrived today. thanks again.
Brett

theastronaut · 07-31-2012, 04:54 PM

Speaker/bracket, driver's visor, and gas tank straps are still available.

theastronaut · 09-07-2012, 04:09 PM

Ttt

05-29-2012, 08:55 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. All parts are from a '66 C10. Will ship USPS parcel post, or priority if it's about the same price. Tracking number will be provided as well. All prices plus shipping. Will be shipping from 29625 zip. Speaker and radio bracket. Cloth and cone are gone but frame and bracket are in good shape. Great for mounting a modern speaker. $35 plus shipping. Wiper motor, three speed with washer. Untested. $35.00 Wiper linkage. Not in the best of shape but all there. $10.00. Left and right visors with arms. Arms are in good condition, one board is missing a section. Patch and recover or just use the arms. $20.00 Gas tank straps. $5.00 Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

06-06-2012, 09:26 AM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. How hard is the conversion from the one speed wiper to the 3 speed? I have a wiper/washer switch, but I think 1 or 2 speed was all chevy had in 63. Also...any wiring issues that you know of for the conversion? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

07-10-2012, 11:59 AM	#4
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. Bump. Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-10-2012, 12:57 PM	#5
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. John, Do you still have the wiper motor? Pics if so? Are the splines on the wiper arms good? Thanks, Dean __________________ 65 Chevy long wide daily driver - SOLD! 64 Chevy Short Step LS

07-10-2012, 04:56 PM	#6
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. Dean, I've still got both. The splines look good other than some overspray, and there's a chip on the edge of one. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-11-2012, 01:12 AM	#8
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. John, I'll take the both the visors unless you'll part with just the passenger side. Shipped to 97230. Thanks, Brett

07-11-2012, 08:27 AM	#9
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. PM's sent! __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-11-2012, 10:23 PM	#10
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. Wiper motor and linkage arms are gone, passenger visor spoken for, and the other parts are still available. Posted via Mobile Device __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

07-24-2012, 08:28 PM	#11
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,084	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. The visor/arm arrived today. thanks again. Brett

07-31-2012, 04:54 PM	#12
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. Speaker/bracket, driver's visor, and gas tank straps are still available. __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

09-07-2012, 04:09 PM	#13
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,901	Re: Misc. Parts, speaker/bracket, visors, wiper motor/linkage, etc. Ttt __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.