|
|
|
07-08-2012, 01:17 PM
|
#1 |
|
Registered User
 
Join Date: Mar 2012
Location: Middleburg, FL
Posts: 210
|
Axle swap????
I have a 68 GMC C15 SWB frame I'm working on. I just found a 82 Chevy C10 truck for parts and was wondering if the rear axle will just bolt in or do I have to change out any parts. I have read about swapping the front crossmember, but have seen any rear axle swaps for the trucks with leaf spring rears.
Any advise or pictures would be great. Thanks, Chris
__________________
Favorite quote: "I'm sick and tired of being sick and tired BĦħ@h!" - Drunk guy in one of my accounts Rides: 67 Chevy C10 LWB Stake Bed(in bad shape)  04 Miti Endeavor AWD(wife's ride) 76 Dodge D100 Club Cab(Hand-me down from my Grandfather) |
|
|
|
07-08-2012, 06:56 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,066
|
Re: Axle swap????
The shocks were attached differently on the later rear ends vs the early leaf rears. Leafs were 2.5"w on the later years vs. 2.25" for the early but that shouldn't be an issue. Measure the widths between mounting pads. If they're close & you can fab the shock mount to correct the differences, it's a viable swap.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
