Eaton HO52 Hub Outer Bearing Retaining Ring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PurdRob · 07-10-2012, 10:53 PM

So I goofed up installing the new inner/outer races in the drum/hub assembly for a 68 C-20. I forgot to install the inner cone and retaining clip before the outer race is pressed in. As the OE bearings were not tapered, and the new ones are, is it really needed to have the clip in on tapered bearings? From what I can see it only secures the race.

FWIW, there is a small step on the axle ends that capture the cone. The other side has the washer/nut combo to pre-load the bearing. So...what d'ya think?

**lolife99** · 07-12-2012, 12:26 PM

Anyone?

07-10-2012, 10:53 PM	#1
PurdRob Registered User Join Date: Oct 2011 Location: Lafayette IN Posts: 18	Eaton HO52 Hub Outer Bearing Retaining Ring So I goofed up installing the new inner/outer races in the drum/hub assembly for a 68 C-20. I forgot to install the inner cone and retaining clip before the outer race is pressed in. As the OE bearings were not tapered, and the new ones are, is it really needed to have the clip in on tapered bearings? From what I can see it only secures the race. FWIW, there is a small step on the axle ends that capture the cone. The other side has the washer/nut combo to pre-load the bearing. So...what d'ya think?

07-12-2012, 12:26 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Eaton HO52 Hub Outer Bearing Retaining Ring Anyone? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.