Steering slop. Want a fix? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

INSIDIOUS '86 · 07-30-2012, 06:31 PM

Got tired of the rag joints making my manual steering feel sloppy. So instead of a complete metal disk in place of the rag joint or a spendy and time consuming borg warner u joint changeover i made some hammer on sleeves and they seem to work pretty dang good

You guys think you may want some?

Posted via Mobile Device

**1774btcrew** · 07-30-2012, 07:59 PM

Your way is the cheapest fix for sure but the Jeep intermediate shaft is really a cheap option as well for the later trucks

WarBeard · 07-30-2012, 09:24 PM

Quote:

Originally Posted by 1774btcrew

Your way is the cheapest fix for sure but the Jeep intermediate shaft is really a cheap option as well for the later trucks

X2

So we need more details on the Sleeves.

INSIDIOUS '86 · 07-30-2012, 08:19 PM

Maybe so but not many jeeps around where im at
Posted via Mobile Device

**1774btcrew** · 07-30-2012, 11:51 PM

There were millions of Cherokees and I see the intermediate shafts on Ebay USED for right around $20-30. To be honest with you I have yet to install mine in my 77 as I have yet to come up with a nice 78 up tilt steering column but it really seems like the way to go. Like I said no where near as cheap as the sleeves but a nice simple upgrade.

INSIDIOUS '86 · 07-31-2012, 12:43 AM

Hmm well i will do a search and maybe ultimately upgrade to that. But these sleeves take like ten min for me to build and hammer on with a ball ping hammer and socket compared to a whole day for just one set of door locks and that's if I have the whole day haha.
Posted via Mobile Device

WarBeard · 07-31-2012, 01:31 AM

Manual steering? I think I see lines. Did you disconnect it?

INSIDIOUS '86 · 07-31-2012, 02:07 AM

Yah pulled the belts I run it once a month and flush the fluid inside. I pulled it so I can get some road feel finally. Once you used to it it's only marginally tough in parking lots.
Posted via Mobile Device

mongoose · 07-31-2012, 02:29 AM

put a restricter in it?

INSIDIOUS '86 · 07-31-2012, 12:03 PM

Then I would be killing power and straining the pump. These steering boxes are simply built to mushy. So I will either underdrive the pump or spend 400 on a agr 12:1 ratio box
Posted via Mobile Device

**1774btcrew** · 07-31-2012, 05:28 PM

Here is the fix I was talking about. I would be willing to try the sleeves though if I hadn't already bought the intermediate shaft http://67-72chevytrucks.com/vboard/s...rokee+steering

INSIDIOUS '86 · 08-03-2012, 12:25 AM

Sometime I will try it and see how it compares to my fix. I just took it out today and it felt and drove like it should and turned when I told it. Helped the road feel for sure bit once I get a new steering box from agr and get rid of that box slop!
Posted via Mobile Device

07-30-2012, 06:31 PM	#1
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Steering slop. Want a fix? Got tired of the rag joints making my manual steering feel sloppy. So instead of a complete metal disk in place of the rag joint or a spendy and time consuming borg warner u joint changeover i made some hammer on sleeves and they seem to work pretty dang good You guys think you may want some? Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-30-2012, 07:59 PM	#2
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Steering slop. Want a fix? Your way is the cheapest fix for sure but the Jeep intermediate shaft is really a cheap option as well for the later trucks

07-30-2012, 08:19 PM	#4
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Steering slop. Want a fix? Maybe so but not many jeeps around where im at Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-30-2012, 11:51 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Steering slop. Want a fix? There were millions of Cherokees and I see the intermediate shafts on Ebay USED for right around $20-30. To be honest with you I have yet to install mine in my 77 as I have yet to come up with a nice 78 up tilt steering column but it really seems like the way to go. Like I said no where near as cheap as the sleeves but a nice simple upgrade.

07-31-2012, 12:43 AM	#6
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Steering slop. Want a fix? Hmm well i will do a search and maybe ultimately upgrade to that. But these sleeves take like ten min for me to build and hammer on with a ball ping hammer and socket compared to a whole day for just one set of door locks and that's if I have the whole day haha. Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-31-2012, 01:31 AM	#7
WarBeard Registered User Join Date: Jul 2008 Location: Show low,az Posts: 808	Re: Steering slop. Want a fix? Manual steering? I think I see lines. Did you disconnect it? __________________ 1978 C10 Silverado Big 10 350/350.. play toy 1990 V1500 Suburban 350/700r4..Daily driver 1987 K10 Silverado 383/400.. Wife's rig WRECKED! 1989 V2500 Suburban 350/400.. SOLD! 1974 C10 Custom10 LWB 350/350.. SOLD! 1974 C10 Custom10 SWB 350/400.. SOLD! 1999 Silverado Z71 LS1.. Wife's rig WRECKED! On the hunt for a new project....... I'm a Chevy guy.....I'm just not a "NEW" Chevy guy.

07-31-2012, 02:07 AM	#8
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Steering slop. Want a fix? Yah pulled the belts I run it once a month and flush the fluid inside. I pulled it so I can get some road feel finally. Once you used to it it's only marginally tough in parking lots. Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-31-2012, 02:29 AM	#9
mongoose Registered User Join Date: Feb 2009 Location: slurrey, bc. Posts: 1,134	Re: Steering slop. Want a fix? put a restricter in it? __________________ -'73 c/10 - Low with Go - will be complete... probably never. -'90 2wd Blazer - well... soon enough anyways. -'84 SWB - the daily gas guzzler.

07-31-2012, 12:03 PM	#10
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Steering slop. Want a fix? Then I would be killing power and straining the pump. These steering boxes are simply built to mushy. So I will either underdrive the pump or spend 400 on a agr 12:1 ratio box Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

07-31-2012, 05:28 PM	#11
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Steering slop. Want a fix? Here is the fix I was talking about. I would be willing to try the sleeves though if I hadn't already bought the intermediate shaft http://67-72chevytrucks.com/vboard/s...rokee+steering

08-03-2012, 12:25 AM	#12
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Steering slop. Want a fix? Sometime I will try it and see how it compares to my fix. I just took it out today and it felt and drove like it should and turned when I told it. Helped the road feel for sure bit once I get a new steering box from agr and get rid of that box slop! Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.