flip kit question for 4/6 drop???

[cmyc5575]

ok i bought my kit for my 4/6 drop and the question i am wanting to know do i have to c- notch the frame or can i just cut the orginal bump stomp and put the smaller ones in when i go to do the flip? thanks guys

[J Knight]

If you install flip bracket only, then just cut out the bumpstop, if you add drop shackles or remove leafs then yes c-notch it.

You need a BARE MINIMUM of 2in of travel between axle and frame. Once your kit is installed and if you have less than 2in....notch it.

[cmyc5575]

Originally Posted by J Knight

If you install flip bracket only, then just cut out the bumpstop, if you add drop shackles or remove leafs then yes c-notch it.

You need a BARE MINIMUM of 2in of travel between axle and frame. Once your kit is installed and if you have less than 2in....notch it.

do you have a pic of the flip bracket?

[INSIDIOUS '86]

Most flip kits I've seen only drop 5in

I have a 6/7 drop on mine and dont have to run a c-notch
Posted via Mobile Device

[J Knight]

These are DJM flip brackets and shock extenders. Recently some guys have been having problems with this brand, I installed 2 sets last year with no problems.

[cmyc5575]

Originally Posted by J Knight

These are DJM flip brackets and shock extenders. Recently some guys have been having problems with this brand, I installed 2 sets last year with no problems.

yeah i read up on that forum something to do with they should only be used for show not high performance. i think that i might have bought the wrong kit do a 4/6 drop