Msd? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CHEVY_FOREVER · 05-23-2003, 01:58 PM

A buddy of mine told me i should get a MSD distributor. I don't know why? What does the MSD do better than the regular one? How will it help? Can anyone recommend which one to get?

Thanks.

Tom · 05-23-2003, 02:25 PM

I wouldnt recommend a full new distributor. Thats overboard and not nessacary. A MSD super HEI kit would be a MUCH better choice IMO. It includes a 6a box and blaster 2 coil. The setup gives a much more powerfull spark, keeps the spark going past 4500rpm [typical fall off point of a stock HEI] and provides 2 sparks below 3000rpm. I love mine.

CHEVY_FOREVER · 05-23-2003, 02:57 PM

That sounds like it would be a good route. Can you feel a difference once installed, I mean is noticable(worth it)?

Also since we are talking some about RPMs, what is a good tach to get... I have been wanting one but wasn't sure if the ones at the part store are worth buying. Can you guys recomend one and where to buy?

Thanks again.

Tom · 05-23-2003, 04:54 PM

Yes it was noticable on my 78, but that motor is running 10.2:1 compression and 6000rpm on a reguler basis. If you have less then 9.5:1 compression and/or dont go above 4500rpm much, then I dont think you'll feel much. Its a great idea to upgrade if a stock part goes south and needs to be replaced anyways though.

As for tachs- I have a autometer PHANTOM line in my 78, its a sweet unit. Auotmeter is the most highly regarded line of gauges out right now. On my 79 I just used a cheapo unit from CHECKERS, its been real good to me so far.

*rage'nrat638* · 05-24-2003, 08:21 AM

just do it

05-23-2003, 01:58 PM	#1
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	Msd? A buddy of mine told me i should get a MSD distributor. I don't know why? What does the MSD do better than the regular one? How will it help? Can anyone recommend which one to get? Thanks.

05-23-2003, 02:25 PM	#2
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	I wouldnt recommend a full new distributor. Thats overboard and not nessacary. A MSD super HEI kit would be a MUCH better choice IMO. It includes a 6a box and blaster 2 coil. The setup gives a much more powerfull spark, keeps the spark going past 4500rpm [typical fall off point of a stock HEI] and provides 2 sparks below 3000rpm. I love mine. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

05-23-2003, 04:54 PM	#4
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,748	Yes it was noticable on my 78, but that motor is running 10.2:1 compression and 6000rpm on a reguler basis. If you have less then 9.5:1 compression and/or dont go above 4500rpm much, then I dont think you'll feel much. Its a great idea to upgrade if a stock part goes south and needs to be replaced anyways though. As for tachs- I have a autometer PHANTOM line in my 78, its a sweet unit. Auotmeter is the most highly regarded line of gauges out right now. On my 79 I just used a cheapo unit from CHECKERS, its been real good to me so far. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

05-23-2003, 02:57 PM	#3
CHEVY_FOREVER USA love it OR leave it! Join Date: Sep 2002 Location: Western Pennsylvania Posts: 162	That sounds like it would be a good route. Can you feel a difference once installed, I mean is noticable(worth it)? Also since we are talking some about RPMs, what is a good tach to get... I have been wanting one but wasn't sure if the ones at the part store are worth buying. Can you guys recomend one and where to buy? Thanks again.

05-24-2003, 08:21 AM	#5
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	just do it



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.