|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-23-2012, 01:08 AM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: chico california
Posts: 68
|
Need some help with the tranny
My buddy has a 1967 chevy c10 pickup and we just took out the old 3 speed and we are trying to replace it with the old sm420. 4 speed. and all the splines and everything else is the same. will the sm420 fit in the bellhousing of the old 3 speed? thanks
|
|
|
|
09-23-2012, 01:51 AM
|
#2 |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Need some help with the tranny
yes
ron |
|
|
|
|
09-23-2012, 01:55 AM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: chico california
Posts: 68
|
Re: Need some help with the tranny
Thanks bud. I think its an sm465. Because it has reverse right and down not left and down. Will the sm465 fit in the same bellhousing to?
Posted via Mobile Device |
|
|
|
|
09-23-2012, 02:38 AM
|
#4 |
|
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: Need some help with the tranny
sm365 has a larger frt input shaft brg retainer. i believe that 1968 was the year that it was introduced. you have 3 options. use the 68 and up b/housing- take your current hsng ta a machine shop and have them enlarge the hole to accept it. use a sm420
ron |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
