Good price for 4.8? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shortbed70 · 12-28-2012, 12:11 AM

Well I am going to start shopping for a 4.8/5.3 this spring. Maybe do a swap next winter. My question is what's a fair milage/price on either motor? I plan on at least doing a cam swap and maybe heads.. An what is a goo estimation on swapping from gen 1 sbc to ls? Trying to get my ducks in a row!
Posted via Mobile Device

mopar250 · 12-28-2012, 02:55 AM

When I was shopping I found everything from an unkown mileage/year 5.3 for 350 with all accesories (in a mud puddle at a local yard) to 5.3 long blocks for 900 with 100k on them. I settled on an 04 5.3 with 86k for 700 with all accesories. Seamed to be lower miles and a good price. As far as the rest, for my swap in my 80 C10 I have 600 in the fuel system (tank, sending unit, pump, lines, fittings), 600 in my harness (had a brand new harness made), 200 in the computer and tune, and about 400 in an LS1 intake (intake, injectors, rails, throttle body). The LS1 intake is just because I liked the looks better so you don't have to use that. Figure about a hundred for motor mounts and you also need to decide what trans you want to use to determine that cost.

**Clyde65** · 12-28-2012, 09:50 AM

Mopar is pretty close. Mine was more just because I did mine in 2009, prices werent that low, I put a 4L60e in mine also and I got about 3K in the swap with everything.

shortbed70 · 12-28-2012, 07:51 PM

Thanks guys! I'm shopping in the next few months, I'm going to keep an eye out for a good deal... I started off wanting a 6.0 but its looking like a 5.3 is a more desirable motor... I don't know which way I want to go guess ill just see what comes up when I can buy..
Posted via Mobile Device

yossarian19 · 12-28-2012, 09:41 PM

I bought a ?? mileage 02 Silverado 4.8 motor w/ manifolds but no accessories for $500. Thought it was complete w/ accessories (ebay) but it wasn't.
In retrospect, should have bought a complete engine locally or gone really in depth with the Ebay seller instead of taking face value of their words.
Don't pay more than 800 for a complete 4.8 w/ harness & accessories. for a 5.3, up to 900 maybe. a 6.0 goes for 1,000 pretty routinely.

12-28-2012, 12:11 AM	#1
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Good price for 4.8? Well I am going to start shopping for a 4.8/5.3 this spring. Maybe do a swap next winter. My question is what's a fair milage/price on either motor? I plan on at least doing a cam swap and maybe heads.. An what is a goo estimation on swapping from gen 1 sbc to ls? Trying to get my ducks in a row! Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-28-2012, 02:55 AM	#2
mopar250 Registered User Join Date: Jan 2012 Location: Lasalle IL Posts: 28	Re: Good price for 4.8? When I was shopping I found everything from an unkown mileage/year 5.3 for 350 with all accesories (in a mud puddle at a local yard) to 5.3 long blocks for 900 with 100k on them. I settled on an 04 5.3 with 86k for 700 with all accesories. Seamed to be lower miles and a good price. As far as the rest, for my swap in my 80 C10 I have 600 in the fuel system (tank, sending unit, pump, lines, fittings), 600 in my harness (had a brand new harness made), 200 in the computer and tune, and about 400 in an LS1 intake (intake, injectors, rails, throttle body). The LS1 intake is just because I liked the looks better so you don't have to use that. Figure about a hundred for motor mounts and you also need to decide what trans you want to use to determine that cost.

12-28-2012, 09:50 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Good price for 4.8? Mopar is pretty close. Mine was more just because I did mine in 2009, prices werent that low, I put a 4L60e in mine also and I got about 3K in the swap with everything. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

12-28-2012, 07:51 PM	#4
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Good price for 4.8? Thanks guys! I'm shopping in the next few months, I'm going to keep an eye out for a good deal... I started off wanting a 6.0 but its looking like a 5.3 is a more desirable motor... I don't know which way I want to go guess ill just see what comes up when I can buy.. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-28-2012, 09:41 PM	#5
yossarian19 Registered User Join Date: Sep 2011 Location: Nevada City, CA Posts: 908	Re: Good price for 4.8? I bought a ?? mileage 02 Silverado 4.8 motor w/ manifolds but no accessories for $500. Thought it was complete w/ accessories (ebay) but it wasn't. In retrospect, should have bought a complete engine locally or gone really in depth with the Ebay seller instead of taking face value of their words. Don't pay more than 800 for a complete 4.8 w/ harness & accessories. for a 5.3, up to 900 maybe. a 6.0 goes for 1,000 pretty routinely.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.