which kit is has best bang for buck

[414banger]

looking to lower my 65 3/5 and looking at different kits and i found 2 but they both are different 1 has sway bars and no shock relocaters and the other has the relocaters but not the sway bars so which would be better bang for buck

http://www.classicperform.com/Store/...6372CSSK-D.htm

http://www.classicindustries.com/tru.../lhp6572a.html

[414banger]

or i found this kit alittle cheaper but still no shock relocaters

http://www.classicperform.com/Store/...k/6572LHPK.htm

[Lugnutz65]

I would not recommend the end link style anti-sway bar sold by CPP. Instead I would recommend the original style sold by ECE. Look under the category "suspension components" and you will see several kits. Here's a photo.

Shock relocators will help give a better ride but are totally optional.

[gimmy 64]

go with ECE that is all they do is parts for our trucks and up to 72

[414banger]

Thanks guys i will look into it when i get of work tonight if i have enuff overtime might even look into a porterbuilt stage 1 kit
Posted via Mobile Device

[414banger]

what exactly would the disadvantage of the end link sway bars by chance

[Lugnutz65]

Originally Posted by 414banger

what exactly would the disadvantage of the end link sway bars by chance

The ECE bar is 1.25". The end link bar is 1.125". So the ECE bar is thicker. Some prefer the way the ECE bar mounts to the top of the lower control arm using the factory pre-drilled holes that are there. I think I saw a lot of GM trucks at the salvage yard, so it is a common way to hook up a sway bar. I think someone said once that with the end link style there might be tire interference in hard cornering (but I think it was only with drastically lowered trucks with certain tire/wheel combinations). Maybe someone else can back me up on that or set me straight if I'm wrong.

FYI - You can find your own ECE style bar at a salvage yard and just buy new bushings. Total cost would be under $60 plus your time.

[414banger]

i am only lowering mine 3/5 for now because i dont have the money for the drop spindles right now so i think i will be alright

[gimmy 64]

check with Boris-- waytolow. he has a shop in i think it is euclid ohio and he is a board member here. might be able to get you a good deal?