Any way to get the rear of my truck down 1-2" more?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe69C10 · 03-22-2013, 10:48 AM

I just did 2.5" drop spindles & 2" lowering springs up front and shes sitting nice and low now.

The rear was already lowered a little when I got it by removing a leaf from the springs. That was definitely not enough, so I just installed 2" drop lowering shackles. Still not low enough, looks good and i like having a little rake to the stance. But another 1"-2" would be perfect. Any suggestions? I would rather not replace the springs and do a flip kit.

Are there lowering blocks?

f.monroe · 03-22-2013, 11:01 AM

Drop hangers for the front of the rear leaf springs will drop it another 2".
Frank

Joe69C10 · 03-22-2013, 11:13 AM

Excellent! That should be perfect. If it ends up being too low I can adjust my shackes to the 1 inch bolt to bring it up a little. For some reason I didnt think about hangers..Thanks.

riz · 03-22-2013, 11:59 AM

drop hangers are by far the easiest way for you.

RIZ

INSIDIOUS '86 · 03-22-2013, 01:46 PM

So your 4.5 up front and about three in back I assume?
Posted via Mobile Device

03-22-2013, 10:48 AM	#1
Joe69C10 Registered User Join Date: Jul 2012 Location: Ocala,FL Posts: 129	Any way to get the rear of my truck down 1-2" more?? I just did 2.5" drop spindles & 2" lowering springs up front and shes sitting nice and low now. The rear was already lowered a little when I got it by removing a leaf from the springs. That was definitely not enough, so I just installed 2" drop lowering shackles. Still not low enough, looks good and i like having a little rake to the stance. But another 1"-2" would be perfect. Any suggestions? I would rather not replace the springs and do a flip kit. Are there lowering blocks?

03-22-2013, 11:01 AM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Any way to get the rear of my truck down 1-2" more?? Drop hangers for the front of the rear leaf springs will drop it another 2". Frank __________________ Born and proudly residing in a Red State !

03-22-2013, 11:13 AM	#3
Joe69C10 Registered User Join Date: Jul 2012 Location: Ocala,FL Posts: 129	Re: Any way to get the rear of my truck down 1-2" more?? Excellent! That should be perfect. If it ends up being too low I can adjust my shackes to the 1 inch bolt to bring it up a little. For some reason I didnt think about hangers..Thanks.

03-22-2013, 11:59 AM	#4
riz Registered User Join Date: Oct 2011 Location: hudson,wi Posts: 805	Re: Any way to get the rear of my truck down 1-2" more?? drop hangers are by far the easiest way for you. RIZ

03-22-2013, 01:46 PM	#5
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: Any way to get the rear of my truck down 1-2" more?? So your 4.5 up front and about three in back I assume? Posted via Mobile Device __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.