|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-11-2013, 09:57 PM
|
#1 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
May be, my first question was lost.
Hi guys from San Diego. Could you give me some ideas how to upgrade a chevy 56 truck 1/2 ton with power stering? thanks |
|
|
|
07-16-2013, 08:19 AM
|
#2 |
|
and a few others
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Your post wasn't lost, you just posted it in the Pre-47 forum. I moved it for ya.
__________________
Bill  US Army Vet -193rd InfantryBlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi |
|
|
|
|
07-16-2013, 07:38 PM
|
#3 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Thank you so much.
I found some info in Classic Performance Parts. They have two kits: one expensive that includes stering box,power stering pump and stering column,plus some spacers and brackets. Other less expensive that is only brackets and spacers that allow swaping 71 and newer chevy van stering box,pump and column. Now I'm reading both info, but if one member at this forum has any ideas, are very welcome. Thanks |
|
|
|
|
07-16-2013, 07:44 PM
|
#4 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
If you look up converting a Ford F-100, they use a Toyota box, mounted in the same location as stock so you do not have the problems with the drag link and tire interference. I have also heard that some mid 2000-10 Gm truck boxes might work to. Look at Denee's thread, she used one of the kits.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
07-16-2013, 08:15 PM
|
#5 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Thank you is, is chevy 56 1/2 ton.
|
|
|
|
|
07-17-2013, 09:20 AM
|
#6 |
|
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,648
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
I would stay away from the kit that mounts the box outside the frame in front of the axle. I have that one and don't like it. I think the other style that mounts a box in the stock location would be better, but knowing what I know now I wouldn't use either one. I'd apply the cost of those kits toward a Scott's setup.
|
|
|
|
|
07-17-2013, 11:20 AM
|
#7 |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
I agree with Russell the geometry on both kits are just bad.
|
|
|
|
|
07-17-2013, 01:14 PM
|
#8 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Thank you, that's what I want to hear, your experience and counseling is very appreciated.
Now I'd like to know were in this forum can I find the SCOOT'S SET UP. |
|
|
|
|
07-17-2013, 01:23 PM
|
#9 |
|
Registered User
Join Date: May 2000
Location: Flin Flon, Manitoba, Canada
Posts: 8,853
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
__________________
My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795 |
|
|
|
|
07-18-2013, 06:21 PM
|
#10 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Me too, thank you.
|
|
|
|
|
07-18-2013, 06:43 PM
|
#11 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Sorry: mi name is CRUZ
|
|
|
|
|
07-18-2013, 09:18 PM
|
#12 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,713
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
The 56 F-100 guys are saying a power steering box for an 85 Toyota 4x4 is the one to use.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
07-18-2013, 10:10 PM
|
#13 |
|
Registered User
Join Date: Feb 2010
Location: San Angelo, Tx
Posts: 1,068
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
CPP just came out with a new PS box earlier this year. They call it a CPP 400 box and it mounts in the same location as the original box does just like the Toyota one does.
I have the 400 box but haven't driven the truck yet as I am in the middle of the restoration on it. I do have it mocked up in place though.  The steering column is and Ididit column shift model. 
|
|
|
|
|
07-18-2013, 11:02 PM
|
#14 |
|
Registered User
Join Date: Nov 2008
Location: Chula Vista California
Posts: 526
|
Re: How to swap column, stering box, power stering on a chevy truck 56 1/2 ton?
Thanks for the pictures.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
