Post pics of how you mounted your TACH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

heathbirkendahl · 07-14-2013, 09:24 PM

Need some ideas.
Posted via Mobile Device

heathbirkendahl · 07-14-2013, 11:34 PM

Bueller? LOL
Posted via Mobile Device

*Mister-B* · 07-15-2013, 12:21 AM

Found the tins and the tach at the junk yard. Added them to my other gauges, bought a new housing from Brothers and brand new bulbs.

Posted via Mobile Device

heathbirkendahl · 07-15-2013, 12:45 AM

Quote:

Originally Posted by Mister-B

Found the tins and the tach at the junk yard. Added them to my other gauges, bought a new housing from Brothers and brand new bulbs.

Posted via Mobile Device

This would be my first choice.

Anyone do an exterior tach?
Posted via Mobile Device

*Mister-B* · 07-15-2013, 01:08 AM

Quote:

Originally Posted by heathbirkendahl

This would be my first choice.

Anyone do an exterior tach?
Posted via Mobile Device

Here's a pic I took of one at the junk yard that looked pretty decent for a non factory one. Pritch ended up buying the cluster, and could probably give you more details

Posted via Mobile Device

swamp rat · 07-18-2013, 11:31 PM

Quote:

Originally Posted by Mister-B

Here's a pic I took of one at the junk yard that looked pretty decent for a non factory one. Pritch ended up buying the cluster, and could probably give you more details

Posted via Mobile Device

Kinda looks like it was mounted into the center stock location, this would require cutting the lens and metal faceplate, maybe even the backing plate too? Humm....

Ok I fess up, that's what i did, it looks pretty clean and it works fine, but 15 years later i kinda wish i hadn't done it.

67CC · 07-17-2013, 09:22 PM

This works ok for me. Just so you don't think I butchered my dash, the holes were already there thanks to the previous owner. Just had to enlarge one a bit. The cup tach is mounted in is fully adjustable, but too expensive.

heathbirkendahl · 07-18-2013, 12:16 AM

Looking good! Thanks for posting.
Posted via Mobile Device

big_al_71 · 07-18-2013, 09:36 AM

here is how I mounted mine

heathbirkendahl · 07-18-2013, 11:16 AM

Quote:

Originally Posted by big_al_71

here is how I mounted mine

Looks awesome! Where did you pick up the bezel from? And do the gauges come separately?

big_al_71 · 07-18-2013, 11:58 AM

Quote:

Originally Posted by heathbirkendahl

Looks awesome! Where did you pick up the bezel from? And do the gauges come separately?

the gauges are all autometer and the bezel is from Covan. It was put togehter by my best friend and it has a harness plug that connects to the main harness meaning that if it needs to be taken off just unplug it and it comes out as a whole..

bruceman1968 · 07-18-2013, 02:49 PM

Here's mine it's a big tach though
Name: P1060128.jpg
Views: 283
Size: 82.0 KB

badform · 07-18-2013, 09:47 AM

Timely thread. I just picked up a couple of old tachs to choose from. Keep the pics coming!

JointTech · 07-18-2013, 09:51 PM

$20 off amazon and a zip tie

magwakeenercew2jh · 07-18-2013, 11:02 PM

Had this one kicking around. Put it in the dash by cutting up the "numbers plate. Not for everybody. But that's the way I did it.

07-14-2013, 09:24 PM	#1
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Post pics of how you mounted your TACH Need some ideas. Posted via Mobile Device __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

07-14-2013, 11:34 PM	#2
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: Post pics of how you mounted your TACH Bueller? LOL Posted via Mobile Device __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

07-15-2013, 12:21 AM	#3
Mister-B Account Suspended Join Date: Oct 2012 Location: Salt Lake City, Utah Posts: 3,332	Re: Post pics of how you mounted your TACH Found the tins and the tach at the junk yard. Added them to my other gauges, bought a new housing from Brothers and brand new bulbs. Posted via Mobile Device

07-17-2013, 09:22 PM	#7
67CC Registered User Join Date: Aug 2011 Location: Milwaukee, WI Posts: 23	Re: Post pics of how you mounted your TACH This works ok for me. Just so you don't think I butchered my dash, the holes were already there thanks to the previous owner. Just had to enlarge one a bit. The cup tach is mounted in is fully adjustable, but too expensive. Attached Images __________________ '67 C20 Custom Camper. 327, three-on-the-tree. No power anything!

07-18-2013, 12:16 AM	#8
heathbirkendahl Registered User Join Date: Jul 2012 Location: Campbell, CA Posts: 452	Re: Post pics of how you mounted your TACH Looking good! Thanks for posting. Posted via Mobile Device __________________ 1971 C/10 - Orange & White 2009 GMC 1500 - Lowered 3/4 22' KMC Slides

07-18-2013, 09:36 AM	#9
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Post pics of how you mounted your TACH here is how I mounted mine Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

07-18-2013, 02:49 PM	#12
bruceman1968 Registered User Join Date: Oct 2009 Location: Tampa Bay Posts: 1,549	Re: Post pics of how you mounted your TACH Here's mine it's a big tach though __________________ CHEVY/GMC VIN DECODERS

07-18-2013, 09:47 AM	#13
badform Registered User Join Date: Jul 2013 Location: B'more, hon! Posts: 31	Re: Post pics of how you mounted your TACH Timely thread. I just picked up a couple of old tachs to choose from. Keep the pics coming!

07-18-2013, 09:51 PM	#14
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,858	Re: Post pics of how you mounted your TACH $20 off amazon and a zip tie __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

07-18-2013, 11:02 PM	#15
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: Post pics of how you mounted your TACH Had this one kicking around. Put it in the dash by cutting up the "numbers plate. Not for everybody. But that's the way I did it. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.