Cpp Tilt column for 63 GMC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dene Risden · 08-23-2013, 12:33 PM

Has anyone installed a CPP tilt column, p/n TC-6772-SB, into a 60-66 truck?
If so, since this is sold as being for the 67-72, were there any problems installing this column in the earlier truck.
Please advise...... I'm desperate for a tilt and unwilling to pay $500 or more for one. Also, I don't weld so I'm looking for a bolt in with minimum fabrication, I'm not a "Bomp", although I wish I was!
Dene

64shortc10 · 08-23-2013, 12:39 PM

Kevsclassics is a member on this board that builds tilt columns!

http://67-72chevytrucks.com/vboard/s...d.php?t=412597

http://67-72chevytrucks.com/vboard/s...d.php?t=426995

http://67-72chevytrucks.com/vboard/s...d.php?t=438371

http://67-72chevytrucks.com/vboard/s...d.php?t=339602

Just a few good things I've heard about him! He will be building mine for my 66!
Tony from Norcal
Posted via Mobile Device

Dene Risden · 08-23-2013, 12:58 PM

Thank you for the referral Tony,
I PM'd Kevin..... Nor Cal "Yeah"
Dene

doobiebro · 08-23-2013, 02:11 PM

Not sure on the part # but I installed one on my 60 and a 63 panel and very happy with the product.... here sum pics..

Dene Risden · 08-26-2013, 08:01 PM

Quote:

Originally Posted by doobiebro

Not sure on the part # but I installed one on my 60 and a 63 panel and very happy with the product.... here sum pics..

Looks clean, thanks for the info, I've been working on mine since 08 and I'm sure its going to be quite a while before it see's pavement....

**lolife99** · 08-23-2013, 02:27 PM

KevsClassics would be my first choice!

C/10 King · 08-23-2013, 03:40 PM

Quote:

Originally Posted by lolife99

KevsClassics would be my first choice!

X2!

Dene Risden · 08-26-2013, 08:03 PM

Quote:

Originally Posted by C/10 King

X2!

I love your truck, totally clean....Thx for the pic
Dene

Dene Risden · 08-26-2013, 08:02 PM

Quote:

Originally Posted by lolife99

KevsClassics would be my first choice!

Made the contact, Thanks Keith

chevy_mike · 08-23-2013, 04:01 PM

FYI, not getting into bashing any companies but anyone looking at a tilt column really needs to read this warning from LVVTA. They are like SEMA but much strictor in testing, based in New Zealand. VERY eye opening.

http://www.lvvta.org.nz/documents/in...ng_Columns.pdf

64shortbox · 08-23-2013, 07:42 PM

How about this one on eRape for $125.00? I got lucky and found my van tilt for $119.00 on eRape but that was a few years ago

http://www.ebay.com/itm/60-s-70-s-ti...b70644&vxp=mtr

Here's another for $150.00

http://www.ebay.com/itm/1967-72-Chev...8ae51f&vxp=mtr

Dene Risden · 08-26-2013, 08:06 PM

Quote:

Originally Posted by 64shortbox

How about this one on eRape for $125.00? I got lucky and found my van tilt for $119.00 on eRape but that was a few years ago

http://www.ebay.com/itm/60-s-70-s-ti...b70644&vxp=mtr

Here's another for $150.00

http://www.ebay.com/itm/1967-72-Chev...8ae51f&vxp=mtr

Thank you for the tip, I gave Kev's classics my request...
Dene

Snailed · 08-23-2013, 08:21 PM

Quote:

Originally Posted by chevy_mike

FYI, not getting into bashing any companies but anyone looking at a tilt column really needs to read this warning from LVVTA. They are like SEMA but much strictor in testing, based in New Zealand. VERY eye opening.

http://www.lvvta.org.nz/documents/in...ng_Columns.pdf

Wow, that's pretty interesting. CPP stuff in general is starting to scare me. I'm pretty sure Summit racing is selling one of the Chinese tilt columns under their own brand.

Dene Risden · 08-26-2013, 08:09 PM

Quote:

Originally Posted by Snailed

Wow, that's pretty interesting. CPP stuff in general is starting to scare me. I'm pretty sure Summit racing is selling one of the Chinese tilt columns under their own brand.

I have had good and bad experience's with CPP, I guess we just have to be on our toes when reviewing all products....
Thx... Dene

lasher78 · 08-24-2013, 09:48 AM

Quote:

Originally Posted by chevy_mike

FYI, not getting into bashing any companies but anyone looking at a tilt column really needs to read this warning from LVVTA. They are like SEMA but much strictor in testing, based in New Zealand. VERY eye opening.

http://www.lvvta.org.nz/documents/in...ng_Columns.pdf

so i guess what that is saying is unless you are prepared to spend a $1000-1500 on a column from one of those 4 manufactures then you might as well just get one out of junkyard if you can find one?
Posted via Mobile Device

Dene Risden · 08-26-2013, 08:10 PM

Quote:

Originally Posted by lasher78

so i guess what that is saying is unless you are prepared to spend a $1000-1500 on a column from one of those 4 manufactures then you might as well just get one out of junkyard if you can find one?
Posted via Mobile Device

Hi I'm checking out Kev's Classics for a 67-72 column...
Dene

Dene Risden · 08-26-2013, 08:05 PM

Quote:

Originally Posted by chevy_mike

FYI, not getting into bashing any companies but anyone looking at a tilt column really needs to read this warning from LVVTA. They are like SEMA but much strictor in testing, based in New Zealand. VERY eye opening.

http://www.lvvta.org.nz/documents/in...ng_Columns.pdf

Wow, a real eyeopener....
Thanks for the Info.... Dene

Snailed · 08-24-2013, 11:37 AM

You can order a quality US made column for well under $500...It's a lot of money but crashing sucks and the cheap ones look pretty junky anyway.

61K10 · 08-24-2013, 11:49 AM

I have a cheap one and it's not bad, not quite the quality of ididt or flaming river. (have had both) all steel not chrome or power-coated. there's not anything in the column thats going to break that i can see. I built everything from the column to steering box, which would be the week link if not done correctly. I guess i will see.

Dene Risden · 08-26-2013, 08:13 PM

Quote:

Originally Posted by 61K10

I have a cheap one and it's not bad, not quite the quality of ididt or flaming river. (have had both) all steel not chrome or power-coated. there's not anything in the column thats going to break that i can see. I built everything from the column to steering box, which would be the week link if not done correctly. I guess i will see.

I hope you have good luck with your column.... Thx for the info....
Dene

Dene Risden · 08-26-2013, 08:15 PM

Quote:

Originally Posted by 61K10

I have a cheap one and it's not bad, not quite the quality of ididt or flaming river. (have had both) all steel not chrome or power-coated. there's not anything in the column thats going to break that i can see. I built everything from the column to steering box, which would be the week link if not done correctly. I guess i will see.

Do you know anyone in your area that has a nice 61 hood for sale?
I have family in Sonora and I have a place in Nevada City not too far from Placerville.
Dene

61K10 · 08-27-2013, 12:14 PM

mine had a 62-66 hood on it (which i still have) had to find one myself. funny, years ago everybody wanted to put the 62-66 hood on the 60-61 trucks. will keep my eye's open for ya. 62oneton---have any more?

08-23-2013, 12:33 PM	#1
Dene Risden Registered User Join Date: May 2010 Location: Concord,CA Posts: 40	Cpp Tilt column for 63 GMC Has anyone installed a CPP tilt column, p/n TC-6772-SB, into a 60-66 truck? If so, since this is sold as being for the 67-72, were there any problems installing this column in the earlier truck. Please advise...... I'm desperate for a tilt and unwilling to pay $500 or more for one. Also, I don't weld so I'm looking for a bolt in with minimum fabrication, I'm not a "Bomp", although I wish I was! Dene

08-23-2013, 12:39 PM	#2
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Cpp Tilt column for 63 GMC Kevsclassics is a member on this board that builds tilt columns! http://67-72chevytrucks.com/vboard/s...d.php?t=412597 http://67-72chevytrucks.com/vboard/s...d.php?t=426995 http://67-72chevytrucks.com/vboard/s...d.php?t=438371 http://67-72chevytrucks.com/vboard/s...d.php?t=339602 Just a few good things I've heard about him! He will be building mine for my 66! Tony from Norcal Posted via Mobile Device

08-23-2013, 12:58 PM	#3
Dene Risden Registered User Join Date: May 2010 Location: Concord,CA Posts: 40	Re: Cpp Tilt column for 63 GMC Thank you for the referral Tony, I PM'd Kevin..... Nor Cal "Yeah" Dene

08-23-2013, 02:11 PM	#4
doobiebro Registered User Join Date: Nov 2011 Location: Chaparral NM Posts: 693	Re: Cpp Tilt column for 63 GMC Not sure on the part # but I installed one on my 60 and a 63 panel and very happy with the product.... here sum pics.. Attached Images __________________ CURRENT & PAST CHEVY TRUCKS 60 C-10 Apache short step side 62 C-10 short step side 66 GMC Long bed fleet side 305 V-6 77 C-20 Custom Deluxe (Blue Goose)

08-23-2013, 02:27 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Cpp Tilt column for 63 GMC KevsClassics would be my first choice! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-23-2013, 04:01 PM	#10
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: Cpp Tilt column for 63 GMC FYI, not getting into bashing any companies but anyone looking at a tilt column really needs to read this warning from LVVTA. They are like SEMA but much strictor in testing, based in New Zealand. VERY eye opening. http://www.lvvta.org.nz/documents/in...ng_Columns.pdf __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

08-23-2013, 07:42 PM	#11
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: Cpp Tilt column for 63 GMC How about this one on eRape for $125.00? I got lucky and found my van tilt for $119.00 on eRape but that was a few years ago http://www.ebay.com/itm/60-s-70-s-ti...b70644&vxp=mtr Here's another for $150.00 http://www.ebay.com/itm/1967-72-Chev...8ae51f&vxp=mtr Last edited by 64shortbox; 08-23-2013 at 07:46 PM. Reason: added another listing

08-24-2013, 11:37 AM	#18
Snailed Registered User Join Date: Jul 2013 Location: Portland, Maine Posts: 219	Re: Cpp Tilt column for 63 GMC You can order a quality US made column for well under $500...It's a lot of money but crashing sucks and the cheap ones look pretty junky anyway.

08-24-2013, 11:49 AM	#19
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Cpp Tilt column for 63 GMC I have a cheap one and it's not bad, not quite the quality of ididt or flaming river. (have had both) all steel not chrome or power-coated. there's not anything in the column thats going to break that i can see. I built everything from the column to steering box, which would be the week link if not done correctly. I guess i will see. __________________ 1961 chevy K10 my build is------------61K10 build

08-27-2013, 12:14 PM	#22
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Cpp Tilt column for 63 GMC mine had a 62-66 hood on it (which i still have) had to find one myself. funny, years ago everybody wanted to put the 62-66 hood on the 60-61 trucks. will keep my eye's open for ya. 62oneton---have any more? __________________ 1961 chevy K10 my build is------------61K10 build

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.