The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1969 - 1972 Blazers and Jimmys Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-24-2013, 02:44 PM   #1
Stoime
Registered User
 
Join Date: Jun 2013
Location: Scottsdale, AZ
Posts: 23
72 K5 Ignition Upgrade

Hope everyone is doing well!

I have a 1972 Blazer with 350 mostly stock (pic attached to my profile). I want to upgrade the ignition system and am not sure what to go with?

I was looking at an MSD Kit with module, coil, dist and wires but is it worth it or as a self contained unit better or other options? I use my truck mostly around town and some mild offroad...

Any recommendations? Whats worked well?

Thanks for your time and recommendations!
Stoime is offline   Reply With Quote
Old 09-24-2013, 05:23 PM   #2
Chulisohombre
Registered User
 
Chulisohombre's Avatar
 
Join Date: Sep 2013
Location: Bangor pa
Posts: 1,223
Re: 72 K5 Ignition Upgrade

I did a hei stock conversion with msd 6a module and wires. Upgraded to accel coil and button. Works great. Make sure you take out the disable link in line in the positive wire to the coil. With the hei it will burn out from the higher amp coil.
Posted via Mobile Device
Chulisohombre is offline   Reply With Quote
Old 09-24-2013, 05:37 PM   #3
Tony454
Registered User
 
Join Date: Jul 2013
Location: Cloquet, MN
Posts: 20
Re: 72 K5 Ignition Upgrade

Go on ebay right now there is a MSD kit with billet distributor, street fire box, coil, and wires for under $300. If you aren't racing then the street fire is plenty, I wouldn't waste my money on a 6a or 6al. Just my 2 cents.
Posted via Mobile Device
__________________
Some people are educated beyond their intelligence.
Tony454 is offline   Reply With Quote
Old 09-24-2013, 08:22 PM   #4
cparman
sharp as a marble
 
Join Date: Jan 2007
Location: atlantic beach,florida
Posts: 1,082
Re: 72 K5 Ignition Upgrade

Not a fan of aftermarket ignition systems. My 69 swb, and my Blazer had an HEI factory dizzy. The thought was that IF I was out cruzing, and i had a failure, I could go to any auto parts store and get what I needed to get me back and running.

I also built the spark plug wires, from a Taylor plug wire set. Ran the front two wires on both sides under the motor mounts. You could almost not see the plug wires in the engine compartment.
cparman is offline   Reply With Quote
Old 09-24-2013, 08:54 PM   #5
Mike C
Registered User
 
Mike C's Avatar
 
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,727
Re: 72 K5 Ignition Upgrade

I have an MSD ready-to-run distributor in the Jimmy. I like the smaller diameter cap for how far back it is in a 4x4. I used Taylor wires as well, just the pre-made ones for a Corvette. Get for a '73 for points type cap and for a '75 if HEI posts.
__________________
44 Willys MB
52 M38A1
64 Corvette Coupe
68 Camaro 'vert LT1 & TH700
69 Z/28 355 12.6's @110
69 Chevy Short Step 4 1/2"/7" drop
72 Jimmy 4WD 4spd 4" & 35's
02 GMC 2500HD 4x4 Duramax
Mike C is offline   Reply With Quote
Old 09-24-2013, 08:59 PM   #6
D.PASSMORE
One of the First
 
D.PASSMORE's Avatar
 
Join Date: Jan 2000
Location: St. Augustine,FL.
Posts: 4,059
Re: 72 K5 Ignition Upgrade

Here two quality built small HEI distributors.

http://performancedistributors.com/p...nition-system/

http://www.davessmallbodyheis.com/

I gave up on Pertronix....
__________________
DAVID PASSMORE
ST AUGUSTINE ,FL
ZIP 32084

'71 SWB K/10 CUSTOM DELUXE (Chili)
'72 BLAZER K/5 Muscle Truck (Mule)
'72 LWB K/20 CHEYENNE (Blackie)
D.PASSMORE is offline   Reply With Quote
Old 09-24-2013, 09:17 PM   #7
truckster
Senior Member
 
truckster's Avatar
 
Join Date: Jan 2001
Location: Orem, Utah
Posts: 7,977
Re: 72 K5 Ignition Upgrade

I haven't seen anything I like better than the factory HEI. It's a little close to the firewall, but it will work. And it's as dependable as the day is long.

Make sure you run a clean 12V to the HEI. The points system uses a resistor to lower the load through the points and make them last longer.
truckster is offline   Reply With Quote
Old 09-25-2013, 06:21 PM   #8
Chulisohombre
Registered User
 
Chulisohombre's Avatar
 
Join Date: Sep 2013
Location: Bangor pa
Posts: 1,223
Re: 72 K5 Ignition Upgrade

I fixed the firewall problem with a BFH. Off road when the body flexes it can crack the dizzy cap.
Posted via Mobile Device
Chulisohombre is offline   Reply With Quote
Reply

Bookmarks

Tags
1972 blazer, ignition

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:03 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com