TX Free 3/4 ton spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jonboy · 09-24-2013, 09:39 PM

If someone might need them, I have the stock 3/4 ton spindles off of my '74 that I would happily give away if someone needed them. I won't ship them, but I can cart them home to Richardson (north D/FW) if it would help someone out. These suckers are heavy!!!

Jonboy · 09-27-2013, 11:46 AM

These aren't overpriced, are they?

**special-K** · 09-29-2013, 08:22 AM

No,but I'd gladly pay shipping if you were willing.

**special-K** · 09-30-2013, 07:26 AM

Are you concerned the weight will cause shipping to be too high? I could sure use these. I have some that are buggered up from bad bearings. I am willing to pay whatever shipping is,wait till it's convenient for you...whatever it takes. I need these and haven't had any luck finding locally.

Jonboy · 09-30-2013, 09:52 AM

Tim,
I have found a home for them locally. I have come to hate shipping anything that doesn't fit in a USPS priority mail box. Are these really that tough to find?

**special-K** · 10-01-2013, 07:15 AM

Well,GM doesn't have any more and you need to find someone parting out an axle. They would have fit in a flat rate box,but no worries.

Jonboy · 10-01-2013, 11:33 AM

Tim, these are (were) 2wd. with the rotors and all I think they might have mangled the box.

**special-K** · 10-01-2013, 10:12 PM

Oh,ok. My bad. I assumed these were 4wd since they are a separate part from the knuckle. It makes sense to me now. Glad you found someone that could use them

09-24-2013, 09:39 PM	#1
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Free 3/4 ton spindles If someone might need them, I have the stock 3/4 ton spindles off of my '74 that I would happily give away if someone needed them. I won't ship them, but I can cart them home to Richardson (north D/FW) if it would help someone out. These suckers are heavy!!! __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-27-2013, 11:46 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles These aren't overpriced, are they? __________________ 1974 Jimmy- 5.3/4L80e/NP241

09-29-2013, 08:22 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles No,but I'd gladly pay shipping if you were willing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-30-2013, 07:26 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Are you concerned the weight will cause shipping to be too high? I could sure use these. I have some that are buggered up from bad bearings. I am willing to pay whatever shipping is,wait till it's convenient for you...whatever it takes. I need these and haven't had any luck finding locally. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-30-2013, 09:52 AM	#5
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles Tim, I have found a home for them locally. I have come to hate shipping anything that doesn't fit in a USPS priority mail box. Are these really that tough to find? __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-01-2013, 07:15 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Well,GM doesn't have any more and you need to find someone parting out an axle. They would have fit in a flat rate box,but no worries. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-01-2013, 11:33 AM	#7
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Free 3/4 ton spindles Tim, these are (were) 2wd. with the rotors and all I think they might have mangled the box. __________________ 1974 Jimmy- 5.3/4L80e/NP241

10-01-2013, 10:12 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Free 3/4 ton spindles Oh,ok. My bad. I assumed these were 4wd since they are a separate part from the knuckle. It makes sense to me now. Glad you found someone that could use them __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.