Wiper arm spline replac?

[rideblue00]

Anyone replace the splines on their arms? Mine are toast! I looked in the FAQ, but didnt see anything on that. Any info would be appre.

[rideblue00]

Bump

[rideblue00]

Has anyone bought the reproduction replacement parts?

[rideblue00]

maybe i should clarify: I'm talking about the part that the arms slide on to. those are the splines that are stripped.

[Blue666]

You can try this or a similar product for blade sets.

http://www.summitracing.com/search/p...-blade-refills

I am not sure what you mean by splines? If you mean the splines in the arm, I think these are cut in & can only be fixed with a replacement arm. TRICO made these also but I'm having trouble finding a web reference.

Blue666

[Blue666]

This arm was used in many applications.

Amazon.com: Trico 73-300 Heavy Duty Adjustable...
Ebay also has a wide selection of parts.

http://www.ebay.com/sch/sis.html?_nk...d=150134868906

[rideblue00]

Not looking for wiper arms, looking for a new post or a way to repair them.

[Blue666]

Something like this? Wiper Pivot Post, AKA wiper transmission post,

[63burban]

They are called trunnions, not real difficult to change the whole assembly as the trunnions are part of the shaft and not replaceable.

[61K10]

you can buy the whole set-up $99 both sides. have not seen a rebuild kit. post a wtb

[jayoldschool]

You can try using some aluminum foil as a shim to take up the space from the stripped splines. Might be enough to give it the required resistance. Easy and free

[rideblue00]

Blue666 that is close, i was hoping to just find the tip with the splines.

[Blue666]

The first picture was found on Amazon.

This link sells Step & Box van parts but also carries some parts for our type trucks.

http://store.stepvanparts.com/PIVOT-SHAFTS-STEPVAN.HTM

I have not been able to find any replacement knurled knobs so you might have to replace the whole pivot.

Good Luck.

[davbowen]

used, they're all over ebay.
http://www.ebay.com/itm/60-61-62-63-...7e848e&vxp=mtr

[rideblue00]

I have it already out of the truck. And i am a machinist and a welder, so i do ok on repairing stuff. I was planning on just replacing the spline. I just need to find a source for the knurled pc. Newer van ones are larger in diameter. I was hoping to come up with a easy and cheap repair. Spending money on used ones with out seeing the splines is a crapshoot. And the repros are $80-90. So i need some used ones to experiment with.