Protecto Plate/owners manual location?!

[budnikguy]

Just wondering where you all found yours...I usually see these in the glovebox or in the visors of my 67-72's...but found it under the glovebox liner, in a tray that looked to made for it in this '66 I am parting...that may be a 65, now that i have found the protecto plate..lol. Thanks for your knowledge.

[budnikguy]

anyone????

[1963c-10]

Normally build sheets will be found under the seats. Look between the springs and the burlap. I've never seen protecto plates in the 60-66 models, although they started to keep better track of the builds in 66.

[budnikguy]

Thanks for the info, I am not looking for the build sheet...but, was more curious as to the location of the owners manual & protecto plate as mine is under the glovebox inner liner sitting in a tray that looks to there specifically for it...which would not be accessible without removing the inner panel. I will post a pic later...Thanks again

Adam

Originally Posted by 1963c-10

Normally build sheets will be found under the seats. Look between the springs and the burlap. I've never seen protecto plates in the 60-66 models, although they started to keep better track of the builds in 66.

[KJSR]

In my GMC it was in one of the manuals in the glove box.

[budnikguy]

This is where I found mine.....

[familyfast64]

That's cool

[budnikguy]

anyone else have theirs in this location??

[Ol Blue K20]

never saw one like that...but...I never looked there either

[NEWFISHER]

My 65 has no provision for that tray. I just installed a new glove box liner and would have seen that.

[cru_zn_29]

That tray is the mount for factory a/c box. Trucks w/o factory air don't have it. Someone must have slipped it up under there between a/c mount and glove box for safe keeping. My 66 has factory a/c and the protecto plate and owners manual was in the glovebox.

[budnikguy]

Interesting...that makes since..thanks for all the informative feedback!