|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-01-2013, 10:50 PM
|
#1 |
|
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Transmission Filter Gasket Issues
I have a 2008 Sierra with the 4L60e. I went to change the trans fluid and put in a new filter. The gasket for the filter will not come out of the transmission.... All I did was mangle the existing gasket. I'm sure its the original because the filter is date stamped November 2007...
Is there a trick? A special tool? I don't want to destroy the aluminum around the port.... help...  
|
|
|
|
12-03-2013, 12:11 AM
|
#2 |
|
Registered User
 
Join Date: Nov 2007
Location: Turlock California 95380
Posts: 2,075
|
Re: Transmission Filter Gasket Issues
This tool made it very simple for me. Stick the hooked end on the lip of the gasket, hit the tool with a hammer,., it should come right out...
__________________
72 C20 Longbed 05 1500 Z71 |
|
|
|
|
12-03-2013, 02:22 AM
|
#3 |
|
Collector of Projects
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
|
Re: Transmission Filter Gasket Issues
Thanks.. I unded up using a 3/8 carriage bolt and a large flat washer... worked great. Got the idea from You-Tube...
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
