|
|
|
01-30-2014, 03:27 PM
|
#1 |
|
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
TAC wiring ?
Can the wires from the TAC module to the pedal be lengthened without any adverse effects? I am needing to make mine about 15" longer, and was hoping to just splice them in the middle to the desired length. They just see voltage, correct? A little extra resistance from the splices shouldn't hurt anything, will it?
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
|
|
|
01-30-2014, 04:00 PM
|
#2 |
|
Senior Member
 
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,237
|
Re: TAC wiring ?
if you cut and solider them and use heat skink to seal it back up u should be fine
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
|
|
|
|
01-30-2014, 09:04 PM
|
#3 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: TAC wiring ?
De-pin the connection, run the whole wire a new length and then re-attach. Thats ideal if you can, because then you do all the soldering off of the truck...the rheostat style sensors on the pedal don't like a ton of heat (I welded a pedal extension on and had to be VERY careful to not overheat the sensors). Additionally, running a whole new length of wire prevents any additional resistance across the solder connection and/or changes in wire gauge.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
\\ MY YOUTUBE CHANNEL
Hybrid Mode
