!964 c10 fender seal? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

omgitsemmanuel · 01-31-2014, 10:05 PM

I have a 1964 c10 that im building but the only keeping me from putting on the front is the fender seal. From lmc that part number is 38-7449 and i cant figure out how these go, Any information helps and if you can show pictures that would be great and one last thing, for the power booster what vehicles could i take it off of and it would fit there with no or little adoption.

Old Bleu · 02-01-2014, 12:56 PM

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

ljackson · 02-01-2014, 02:11 PM

I used some galvanized electric fence wire and made staples. It turned out good for my 1st time trying. I got the idea here on the forum. I used black WS adhesive where the seals needed to be glued. I taped them in place and let them sit overnight.

omgitsemmanuel · 02-02-2014, 05:20 PM

thanks that really help

omgitsemmanuel · 02-02-2014, 05:29 PM

Quote:

Originally Posted by Old Bleu

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

ill check them hopefully and if i call they should be able to tell me if they have them.

ljackson · 02-03-2014, 07:52 AM

I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=564999

http://67-72chevytrucks.com/vboard/s...d.php?t=522765

omgitsemmanuel · 02-03-2014, 10:36 AM

Quote:

Originally Posted by ljackson

I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=564999

http://67-72chevytrucks.com/vboard/s...d.php?t=522765

Thanks for the info. I can't find my plate have no idea where it went so going to have to make something but I have and idea now on what I can do.

1963c-10 · 02-03-2014, 11:29 AM

Anybody know where to find the finish panel retainers?

Old Bleu · 02-03-2014, 11:34 AM

I ordered mine from classicparts.com. They and the new seals are on the big brown truck, set to be delivered today.

1963c-10 · 02-03-2014, 12:18 PM

ok, thanks. Found them. Link if anybody else needs them. Part #37-663 $.95 each http://www.classicparts.com/1960-66-.../#.Uu_Bi9iYaUk

Danny#2 · 02-03-2014, 06:40 PM

I need a good pair of the closing panels. The right and left sides.

01-31-2014, 10:05 PM	#1
omgitsemmanuel Registered User Join Date: Jan 2014 Location: Morgan Hill Posts: 18	!964 c10 fender seal? I have a 1964 c10 that im building but the only keeping me from putting on the front is the fender seal. From lmc that part number is 38-7449 and i cant figure out how these go, Any information helps and if you can show pictures that would be great and one last thing, for the power booster what vehicles could i take it off of and it would fit there with no or little adoption.

02-02-2014, 05:20 PM	#4
omgitsemmanuel Registered User Join Date: Jan 2014 Location: Morgan Hill Posts: 18	Re: !964 c10 fender seal? thanks that really help

02-03-2014, 07:52 AM	#6
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: !964 c10 fender seal? I also found this today. It's out of an assembly manual. Have you had a chance to get some manuals? These mentioned in the threads below helped me a lot. Good luck with your truck. http://67-72chevytrucks.com/vboard/s...d.php?t=564999 http://67-72chevytrucks.com/vboard/s...d.php?t=522765 Attached Images __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.

02-03-2014, 11:29 AM	#8
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: !964 c10 fender seal? Anybody know where to find the finish panel retainers? __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-03-2014, 11:34 AM	#9
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: !964 c10 fender seal? I ordered mine from classicparts.com. They and the new seals are on the big brown truck, set to be delivered today.

02-01-2014, 12:56 PM	#2
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: !964 c10 fender seal? On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

02-01-2014, 02:11 PM	#3
ljackson Registered User Join Date: Apr 2009 Location: Amarillo, Texas Posts: 636	Re: !964 c10 fender seal? I used some galvanized electric fence wire and made staples. It turned out good for my 1st time trying. I got the idea here on the forum. I used black WS adhesive where the seals needed to be glued. I taped them in place and let them sit overnight. Attached Images __________________ Father and son built. Driven daily since 2012. 283, 3 speed. Mostly original. '81 PS and disk front. Fuel tank relocate. Maintenance, repairs and upgrades on his dime now. http://zacks64longfleet.shutterfly.com/ Higher res. photos in my gallery.

02-03-2014, 12:18 PM	#10
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: !964 c10 fender seal? ok, thanks. Found them. Link if anybody else needs them. Part #37-663 $.95 each http://www.classicparts.com/1960-66-.../#.Uu_Bi9iYaUk __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

02-03-2014, 06:40 PM	#11
Danny#2 Registered User Join Date: Nov 2013 Location: Rapid City, South Dakota Posts: 83	Re: !964 c10 fender seal? I need a good pair of the closing panels. The right and left sides.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.