47-53 running board filler panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BlueJeep · 03-13-2014, 08:26 PM

Does anyone have any close up pictures of 47-53 running board filler panels? I'm specifically looking for what the tab that bolts to the rear fenders is supposed to look like, mine were gone. I need to re-create them and I'm trying to see what they should look like when done.

Looking for a close up of the back side of the tab:

Thanks!

**mr48chev** · 03-13-2014, 09:23 PM

I've got a pair of long wheel base board sitting on saw horses with the fillers on them at home, Let me see if they are all together so I can take a photo or two in about an hour. Everything should be the same except the length.

**mr48chev** · 03-13-2014, 10:54 PM

Here is the best photo

link to the four photos that look somewhat presentable plus the bracket on the front end.
http://s173.photobucket.com/user/mr4...?sort=4&page=1

I didn't get any measurements though.

BlueJeep · 03-14-2014, 09:16 PM

Thank you Mr48chev! Looks like it might be thicker than the panel itself, maybe 16 ga?

03-13-2014, 08:26 PM	#1
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	47-53 running board filler panels Does anyone have any close up pictures of 47-53 running board filler panels? I'm specifically looking for what the tab that bolts to the rear fenders is supposed to look like, mine were gone. I need to re-create them and I'm trying to see what they should look like when done. Looking for a close up of the back side of the tab: Thanks! __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

03-13-2014, 09:23 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: 47-53 running board filler panels I've got a pair of long wheel base board sitting on saw horses with the fillers on them at home, Let me see if they are all together so I can take a photo or two in about an hour. Everything should be the same except the length. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-13-2014, 10:54 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: 47-53 running board filler panels Here is the best photo link to the four photos that look somewhat presentable plus the bracket on the front end. http://s173.photobucket.com/user/mr4...?sort=4&page=1 I didn't get any measurements though. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

03-14-2014, 09:16 PM	#4
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: 47-53 running board filler panels Thank you Mr48chev! Looks like it might be thicker than the panel itself, maybe 16 ga? __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.