|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-01-2014, 05:48 PM
|
#1 |
|
Registered User
Join Date: Jan 2014
Location: Wakeman
Posts: 19
|
1990 tbi tranny swap question
Ok this is a 90 tbi 454 th400 1 ton but i am using the motor and harness in a different truck that was a 4 speed 4x4. The thing is since the truck was a auto and tbi the ecu is setup for the auto and i am going to be using a 90 5 speed in the other truck will i have to get a ecu for a manual tranny tbi 454 or will i be able to use this ecu and have no issues?
|
|
|
|
04-01-2014, 08:43 PM
|
#2 |
|
Registered User
Join Date: Jan 2013
Location: Jasper, IN
Posts: 948
|
Re: 1990 tbi tranny swap question
Should be no problem since both are 454 n tbi yes? The th400 never was electronic, as neither will the 5 speed. Now the speedo idk about that so good luck there.
__________________
When in doubt, throttle it out! 1974 Chevrolet Custom K20 2005 Ford Ranger Edge 1985 Chevrolet Custom Deluxe C10 |
|
|
|
|
04-01-2014, 08:53 PM
|
#3 |
|
Registered User
Join Date: Jan 2014
Location: Wakeman
Posts: 19
|
Re: 1990 tbi tranny swap question
Other truck wasn't 454 TBI but I am changing the whole harness inside and out to the 454. That was what I thought but I was just curious.
Thanks |
|
|
|
|
04-02-2014, 11:43 AM
|
#4 |
|
Account Suspended
Join Date: Apr 2009
Location: hazard, ky
Posts: 1,674
|
Re: 1990 tbi tranny swap question
standard and auto trucks use the same ecm. speedo will be electric on both.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
