Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-03-2014, 01:31 PM | #1 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
DBW pedal mounting bracket
DBW mounting bracket for Corvette Pedal $60 Shipped via USPS (updated 10/4/2022) Paypal: robhartley@aol.com, enter "CPB" in message block. I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation. It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know. Rob ************** GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123 **************
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 10-04-2022 at 10:53 AM. |
06-04-2014, 07:21 PM | #2 |
Registered User
Join Date: May 2013
Location: Lumberton, TX
Posts: 795
|
Re: DBW pedal mounting bracket
Does the pedal arm bottom out on the floorboard at wot? What's your paypal?
__________________
67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435 |
06-05-2014, 01:10 PM | #3 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
No interference. It is placed to get full throw on the pedal. PM sent.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 06-19-2014 at 09:01 AM. |
06-05-2014, 01:29 PM | #4 |
Registered User
Join Date: May 2013
Location: Lumberton, TX
Posts: 795
|
Re: DBW pedal mounting bracket
Thanks for the info and all your help. PM replied
__________________
67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435 |
06-06-2014, 01:55 AM | #5 |
Registered User
Join Date: Mar 2014
Location: Russellville, AR
Posts: 81
|
Re: DBW pedal mounting bracket
Whats the part number on that corvette pedal?
|
06-06-2014, 03:01 AM | #6 |
Registered User
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
|
Re: DBW pedal mounting bracket
I would like one of these brackets. Can you send me your paypal Info.
Also interested in the Corvette pedal p/n if anyone has it.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily |
06-06-2014, 09:28 AM | #7 | |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
25835421
Quote:
I added the part number to the my first post. Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks, Rob
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
06-06-2014, 11:09 AM | #8 |
Registered User
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
|
Re: DBW pedal mounting bracket
That will work fine for me. Paypal payment sent.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily |
06-06-2014, 12:21 PM | #9 |
Registered User
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,065
|
Re: DBW pedal mounting bracket
So you only have to switch 2 wires to run this on a 04 5.3 motor?
__________________
Keagan 68 SWB C-10 original 350 A/C 503 Mean Green |
06-06-2014, 12:48 PM | #10 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Thanks!
If you want to use the Corvette pedal. Post a picture of your DBW plug.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
06-08-2014, 09:32 AM | #11 |
Registered User
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,065
|
Re: DBW pedal mounting bracket
I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.
__________________
Keagan 68 SWB C-10 original 350 A/C 503 Mean Green |
06-08-2014, 02:21 PM | #12 |
Registered User
Join Date: Jul 2008
Location: El Dorado, Ar
Posts: 10
|
Re: DBW pedal mounting bracket
I already have an 04 truck pedal. Will this bracket work
|
06-08-2014, 08:22 PM | #13 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Can you post a picture of your pedal and the connector?
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
06-11-2014, 09:44 AM | #14 | |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Quote:
As is, if you mount the truck pedal to the bracket, I think it will push the pedal to far towards the driver. I'm going to do some more prototyping with the truck pedal to see what I can come up with. Steve - you pedal bracket will be shipped USPS today. Thanks,
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
06-19-2014, 09:43 AM | #15 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Another picture of the setup.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
06-19-2014, 09:46 AM | #16 |
Registered User
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
|
Re: DBW pedal mounting bracket
Good Deal!
Thanks!!!
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily |
06-22-2014, 09:46 AM | #17 |
Vintage Evil
Join Date: Aug 2005
Location: Hastings, Nebraska
Posts: 956
|
Re: DBW pedal mounting bracket
I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week
__________________
Current Rides: Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread EvilK5 - 71 K5 Blazer Evil Twin - 2006 Suzuki M109R EvilDmax- 2018 GMC 2500 Denali Duramax |
06-29-2014, 02:18 AM | #18 |
Registered User
Join Date: Jun 2003
Location: ga
Posts: 630
|
Re: DBW pedal mounting bracket
do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high
__________________
4x4k30 if trouble was money i would have plenty |
06-29-2014, 05:15 PM | #19 | |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Quote:
Thank you! Can you post pictures of where the pedal would mount?
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
06-29-2014, 09:08 PM | #20 |
Registered User
Join Date: Jun 2003
Location: ga
Posts: 630
|
Re: DBW pedal mounting bracket
my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes
__________________
4x4k30 if trouble was money i would have plenty Last edited by 4x4k30; 06-29-2014 at 09:13 PM. |
06-29-2014, 09:48 PM | #21 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Thanks for the pics. I'm going to have to find a local truck and do some measuring.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
02-16-2015, 09:33 AM | #22 |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
OK guys. I just picked up a clean one owner 86, so now I have a guinea pig to build a bracket. Who's still interested?
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
06-30-2014, 11:01 AM | #23 |
Registered User
Join Date: May 2013
Location: Houston Texas
Posts: 713
|
Re: DBW pedal mounting bracket
Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings! |
07-21-2014, 04:21 AM | #24 |
Registered User
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
|
Re: DBW pedal mounting bracket
Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal? I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e) 1990 K1500 Daily |
07-26-2014, 10:39 AM | #25 | |
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
|
Re: DBW pedal mounting bracket
Quote:
I will try to get some pictures taken today or tomorrow to show the difference. Bump this to the top if I haven't by tomorrow evening.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|