|
06-21-2014, 06:13 PM | #1 |
Registered User
Join Date: Apr 2014
Location: Mansfield, Tx
Posts: 7
|
Needing help
Hey guys, fairly new here to the forum and to the SWB world, im replacing the driver side fender for my 1985 swb but having problems getting to the three bolts in the front. One at the top and the two at the bottom near the lights... any advice? if you guys have any pics or diagrams pleas feel free to post...
Last edited by shortbednewbie; 06-21-2014 at 06:14 PM. Reason: didn't add year |
06-21-2014, 07:22 PM | #2 |
Home Built '87
Join Date: May 2010
Location: Calgary, Alberta Canada
Posts: 1,829
|
Re: Needing help
Try putting a floor jack under the fender or the rad support to get them to line up. Also try having someone push or pull on the rad support to line it up.
It's normal to have to fiddle with these a while as no two of these trucks are the same.
__________________
Gordon 1998 White Chev ext cab 2WD (Summer Project) http://67-72chevytrucks.com/vboard/s...d.php?t=408424 1987 Chev Silverado SWB (Winter Project Rebuild) http://67-72chevytrucks.com/vboard/s...d.php?t=424833 Truck Club http://67-72chevytrucks.com/vboard/s...d.php?t=466969 |
06-22-2014, 01:50 AM | #3 |
Registered User
Join Date: Apr 2014
Location: Mansfield, Tx
Posts: 7
|
Re: Needing help
Im trying to get the fender off. Wondering how this would help me to get to the screws? Thanks for the reply
|
06-22-2014, 09:00 AM | #4 |
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: Needing help
I use a wobble socket on a 12" extension and zip them off with my cordless if I remember. They are not a huge challenge to get to.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
Bookmarks |
Tags |
fender, front, replace |
Thread Tools | |
Display Modes | |
|
|