Would S10 rotors fit on C10 spindles?

[jayfire]

I already have my wheels, but when I put the drop spindles on the front, the tire will rub on the fender. The wheels have the 5x4.75 pattern, so I have
1.25" adapters on them and it just pushes them out a little too far. Would any front rotors from an S10, camaro or any other 5x4.75 pattern fit on a set of drop spindles for a 84 C10? Or would it be cheaper to have the rotors drilled and new studs put in for that pattern? Thanks

[lolife99]

This has been addressed before.
There is a couple of options.
Re-drill would be the cheapest.

The other option is s little more complicated.
Use the following parts:
1) 73-87 Light Duty spindles for 1" rotors
2) 1992 Camaro 1LE rotors
3) 73-87 Calipers and bearings for Light Duty rotors.

The second option is a good choice if you are adding drop spindles.
Your truck may already have the light duty rotors.
DO you know your current rotor width?

[jayfire]

Thanks for the info. I found some old threads by searching Bing. I do have the light duty spindles, rotors and everything else. I just bought the 1LE Camaro rotors and will be getting drop spindles very soon as well. Thanks

[maxxxy]

You can use the camaro rotors with your factory truck spindles, or your truck drop spindles.