Parking brake components

[Kenfuzed]

I recently bought a 66 C10 SWB that I'm in the process of putting back together. The PO appears to have remove almost all of the parking brake parts. All that remains is the 2 rear cables hanging out of the drums (zip-tied to the frame) and the lever under the dash. I don't see any remaining brackets or hardware so I'm starting from scratch.

Does anyone have a list of all the parts I need and if any vendor sells all of them still? A parts manual is next on my list but I was hoping to get an accurate list so I can just buy everything I need all at once.

Current truck specs: 1966 C10 fleetside shortbed, th350 auto, 6 lug rear drums. Unknown what is original and what is borrowed since the front clip suspected to be from a mid-70's truck (5-lug disc) and the trans cross member looks to be changed (different shade of dirt).

[LostMy65]

Here is a detailed pic of pieces.
http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=97
But compare the prices from other vendors.
LMC tends to be overpriced on many things.

[bmacneal]

be careful, the brake cables for a coil spring axle are different than a leaf spring axle. there is a company named " inline tube" that makes reproduction cables for both leaf and coil spring axles. www.inlinetube.com give them a ring. very nice people. they sell most of their cables on ebay. they also make pre-bent brake lines if you need them

[jayoldschool]

Too funny. My truck has all the parts except for the parts you actually have...

[Kenfuzed]

Thanks this is what I was looking for! The previous owner did all new brake lines but left off the e-brake parts.