Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-06-2014, 08:17 PM | #1 |
Registered User
Join Date: Mar 2011
Location: Bakersfield Ca.
Posts: 417
|
Need help with rear end id
I just bought a 66 chevy panel the sheet on the glove box door says it has a 3.73 posi. I would like to varify that ,the code on the axle tube is hc123ow
d mark |
07-06-2014, 08:48 PM | #2 |
Registered User
Join Date: Oct 2012
Location: Crosby, Tx
Posts: 300
|
Re: Need help with rear end id
pull the rear pan off. if you see springs and stuff in the carrier. it will be a posi. if not, then its an open carrier just a 373 like mine.
__________________
1965 C10 Project |
07-07-2014, 01:27 AM | #3 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Need help with rear end id
It should be a posi, but you know most anything can happen in 48 years. The best thing to do is pull the rear cover and have a look. The oil more than likely needs changed anyway. The differential is one of the most neglected parts of a vehicle. For some reason most people seem to be afraid to pull the cover and change the gear oil. It is very simple and will only cost you a couple quarts of gear oil, posi additive if applicable, and a cover gasket. In exchange for that you will know exactly what is in your differential, the condition of it and the satisfaction of knowing it has fresh gear oil and will be good for a couple years, depending on how much you drive it.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|