TX wtb-transfer case boot trim ring and front drive shaft for 70 blazer auto

[ld271]

I'm looking for a transfer case boot trim ring and also a front drive shaft for 70 blazer automatic. Probably obvious but it's a high hump and shifter's on the column.

[JimH2828]

I have these...all 3 are 4x4 shifter stick boot rings. Left one is a 69-70 and right ones are 71-72.



-Jim

[JimH2828]

I found a front drive shaft for you.. Off an original 70 Blazer with Dana 44 front and NP 205 transfer case. Front diff yoke in very good shape. CV knuckle in good shape. The transfer case yoke is pitted. You will definitely want to replace the U-joints and centering socket that is in the middle of the knuckle joint. I'll price it right at $115 shipped.....the yoke and knuckle are worth that. It's 1310 u-joints all around. Collapsed length is 27 1/2".




-Jim

[ld271]

Awesome. I'll take the drive shaft for sure. The 70 trim ring looks correct. Here's a couple pics next to tape measure to make sure. If it looks close, I'll take it too. PM me with your info. Thanks, Larry

[71blksuper4x4]

Jim, should be correct. That looks like the correct trim ring off of the early np205 blazers. Trevor