fleetside backup light location

[chad64chevy]

ok guys, I have back up lights that I want to add to my fleetside but need some help to figure out where to cut the holes! I know somewhere or someone has to have a graft or something! I looked in the for sale thread and seen a nos backup light kit and it has a paper that you put under the tail light and mark holes and what not! that paper should be copied and added to the faq thread! any help would be great

[Woogeroo]

check the 60-66 FAQ Index, look under Beds.

(the lights go in the beds, so I put 'em there)

-W

[chad64chevy]

I did look there! I was hoping someone might have the template that tells you how far down below the tail light to mark the holes! I know the hole that you cut is a round hole with two notches in it for the bolts

[Woogeroo]

Well, you would probably have a better chance at getting an answer in one of those threads... as some folks with important knowledge may have subscribed to a thread... and it will be brought to their attention... and they can add it to the pile.

Not all of the folks who REALLY know about our trucks peruse the forum everyday...

It's the wonky way forums work sometimes is all.

Carry on.

(if someone has the correct answer, that would be really cool, for the fleetsides and the step sides.)

-W

[aerotruk63]

One of the templates I lost after my truck was assembled. I made a plea in previous threads to share templates and instructions. I'd be willing to be the guardian to save and mail copies like I do with the templates I do have. Sorry I can't help you more.

[chad64chevy]

thanks woog and aerotryk63, I send grandpa54 a pm asking if he would be willing to copy and mail the template and the instructions to me! if he will, then I will send you a copy areotruk to add to your collection

[chad64chevy]

got a pm back from grandpa54 today, he will be copying the template an instructions for me when he gets back in town! as soon as I get the copy one will be send to you areotruk

[LostMy65]

if someone can scan it to pdf, I can make a CAD template with a scale to ensure size accuracy.

[aerotruk63]

Life just gets better and better!

[chad64chevy]

ok, guys yesterday I got the copy of the template from grandpa54, now I can add the backup lights to my truck!


if anyone knows how to copy the template to pdf, let me know so lostmy65 can make a CAD template! ill send you a copy, so he can do it! thanks everyone for commenting and a big thanks to grandpa54 for the copy of the template!!

[ACK]

Originally Posted by chad64chevy

ok, guys yesterday I got the copy of the template from grandpa54, now I can add the backup lights to my truck!


if anyone knows how to copy the template to pdf, let me know so lostmy65 can make a CAD template! ill send you a copy, so he can do it! thanks everyone for commenting and a big thanks to grandpa54 for the copy of the template!!

I can create a scaled PDF, I'll PM you my contact info.

[chad64chevy]

here is two pics if anyone an do anything with them

[LostMy65]

Actually, a scan or a copy can be somewhat out of scale.
What you posted will work good enough for a rough draft. Then I'll use my set of 66 fleetside bed sides to check for placement accuracy of the template. I'll then create a pdf template with a scale like I did for Captainfab's Power Steering Adapter Plate Template.
I'll post here, both the pdf and CAD file as an attachment, when I get it done.

[LostMy65]

Sorry, I forgot all about this thread.
If someone could bump this thread after the holidays, I'll make some time to put the template together.

[65 C20]

Originally Posted by LostMy65

Sorry, I forgot all about this thread.
If someone could bump this thread after the holidays, I'll make some time to put the template together.

LostMy65

Just a friendly reminder

[LT1 Burb]

Sweet, I could use one.

[65 C20]

That's great as I could use one also.

[dgailfus]

LostMy65; Thank you! I'm going to need this template as well.

On another note, has anyone changed the lens covers to amber and turned their backup lamps into turn signals?

[65 C20]

Originally Posted by dgailfus

LostMy65; Thank you! I'm going to need this template as well.

On another note, has anyone changed the lens covers to amber and turned their backup lamps into turn signals?

dgailfus, 1st post.
Welcome to the forum.
I am not 100% sure but you may be able to just put in an amber bulb if that is what you are going for.

[LostMy65]

Someone please just remind me after New Year.

[dgailfus]

Happy New Year! Hitting you up for that template, please!

[Skywalker1210]

related question: how and where would you connect the switch for the backup lights? I had one behind my gauges but that one is gone. I have lights but dunnow how to make them work...

I have manual transmission. Any help would be appreiciated

[vince1]

4sp or 3 sp manual? My 4 sp stick has a lever at the bottom but the switch is missing. The wires come out to it. I've jumpered them and using a toggle switch in the dash that the previous owner had used for headlights because the floor was too rusted out to operate the dimmer switch. Can't remember where the source comes from but may look tomorrow when it is supposedly going to warm up. Maybe look online for a 66 wiring diagram and it should be there.

[Skywalker1210]

Originally Posted by vince1

4sp or 3 sp manual? My 4 sp stick has a lever at the bottom but the switch is missing. The wires come out to it. I've jumpered them and using a toggle switch in the dash that the previous owner had used for headlights because the floor was too rusted out to operate the dimmer switch. Can't remember where the source comes from but may look tomorrow when it is supposedly going to warm up. Maybe look online for a 66 wiring diagram and it should be there.

Thanks Vince!! I will check online then. mine is a four speed but there were no wires nor a lever tho...

[dgailfus]

Toggle switch or if you have a 4sp floor shift you could connect a micro-switch so that when the shift lever goes back or up it makes contact with the switch. 3sp column you might be able to make a micro-switch work through the linkage on the transmission.