OK I need a little HELP... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dans66Chevy · 07-31-2014, 07:29 AM

Im thinking of pulling the trigger on a 63 SWB. The truck is 2000 miles away. My problem is im a BIG dude. How much room is between the steering wheel and the seat? If I was to remove the gas tank would the seat move back any farther? I have wanted one of these trucks for years. I don't want to get it and feel like a sardine. Thanks in advance.

Ozzy2013 · 07-31-2014, 07:35 AM

Yes moving the seat back helps and you can put a tilt column in with a smaller wheel unless you are 8 foot tall it will work .lol

**Clyde65** · 07-31-2014, 08:22 AM

OK, so how big are you?

I am 6'3" 300lbs, are you bigger?

removing the tank provides very little extra space but, you could change the seats to accommodate a little more...You!

I sit in my 65 with 2005 power 40/20/40 seats and I am comfortable.

1963c-10 · 07-31-2014, 08:35 AM

I agree with Clyde. The room you'll gain by removing the tank is very marginal. Some people do shorten the columns a few inches and a change in seat design will help.

Dans66Chevy · 07-31-2014, 09:10 AM

I need to find one I can sit in.I have a Ice Cream Truck business. I want to put a shop truck together with my business name on the side. I have a 66 Impala that I have owned since I was 15. It was in Super Chevy magazine at one time.

07-31-2014, 07:29 AM	#1
Dans66Chevy Registered User Join Date: Jul 2014 Location: up-state ny Posts: 93	OK I need a little HELP... Im thinking of pulling the trigger on a 63 SWB. The truck is 2000 miles away. My problem is im a BIG dude. How much room is between the steering wheel and the seat? If I was to remove the gas tank would the seat move back any farther? I have wanted one of these trucks for years. I don't want to get it and feel like a sardine. Thanks in advance.

07-31-2014, 07:35 AM	#2
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: OK I need a little HELP... Yes moving the seat back helps and you can put a tilt column in with a smaller wheel unless you are 8 foot tall it will work .lol

07-31-2014, 08:22 AM	#3
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: OK I need a little HELP... OK, so how big are you? I am 6'3" 300lbs, are you bigger? removing the tank provides very little extra space but, you could change the seats to accommodate a little more...You! I sit in my 65 with 2005 power 40/20/40 seats and I am comfortable. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-31-2014, 08:35 AM	#4
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: OK I need a little HELP... I agree with Clyde. The room you'll gain by removing the tank is very marginal. Some people do shorten the columns a few inches and a change in seat design will help. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

07-31-2014, 09:10 AM	#5
Dans66Chevy Registered User Join Date: Jul 2014 Location: up-state ny Posts: 93	Re: OK I need a little HELP... I need to find one I can sit in.I have a Ice Cream Truck business. I want to put a shop truck together with my business name on the side. I have a 66 Impala that I have owned since I was 15. It was in Super Chevy magazine at one time.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.