62 Chevy C10 Stepside - Parking Brake and Pedal Assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HawkFlight · 08-13-2014, 08:49 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

**Captainfab** · 08-14-2014, 01:58 AM

If you plan on keeping the original brake/clutch master cylinder, you will need an original pedal assembly. Reason being that the master cylinder needs to bolt directly to the pedal bracket for strength and stiffness. The e-brake handle should be the same from '60-'66 and maybe thru '68. You might check in the '60-'66 classifieds here on the forum.

neglected61 · 08-16-2014, 03:47 AM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

08-13-2014, 08:49 AM	#1
HawkFlight Registered User Join Date: Dec 2012 Location: Greer, South Carolina Posts: 15	62 Chevy C10 Stepside - Parking Brake and Pedal Assembly Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 08-16-2014 at 07:44 AM.

08-14-2014, 01:58 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: 62 Chevy C10 Stepside - Parking Brake and Pedal Assembly If you plan on keeping the original brake/clutch master cylinder, you will need an original pedal assembly. Reason being that the master cylinder needs to bolt directly to the pedal bracket for strength and stiffness. The e-brake handle should be the same from '60-'66 and maybe thru '68. You might check in the '60-'66 classifieds here on the forum. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-16-2014, 03:47 AM	#3
neglected61 Registered User Join Date: Mar 2014 Location: Peoria,AZ Posts: 55	Re: 62 Chevy C10 Stepside - Parking Brake and Pedal Assembly Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by 63 & 64 Bowties; 08-16-2014 at 07:45 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.