Flarestat 105 Flasher info?

[DURG]

I pulled this today out of a mid sixties C30 truck. Hard to see but it has the 3 Chevrolet bowties on the red pull knob and the chrome bracket was attached to the left underside of the dash. I'm curious if this would have been factory or an optional item added later. Looks like the backside of the plastic terminal is where the actual flasher itself plugs in?

http://i224.photobucket.com/albums/d...ps3a735c0f.jpg

http://i224.photobucket.com/albums/d...ps0afca164.jpg

Probably not something I will use on my current truck, just thought it was a cool item.

[DPowers]

Option on C10's. A lot of big trucks had them and some passenger cars used the same. They are avail on Ebay also.

[pimpston65]

Originally Posted by DPowers

Option on C10's. A lot of big trucks had them and some passenger cars used the same. They are avail on Ebay also.

they can be pricy from other places then the forum thou, and i even seen "new" version with GM logos and the old style boxes go for a couple of benG's

[jonzcustomshop]

if you can, get the other end of the harness, it has a specific plug that will plug into the junction of the column harness (turn signal harness), and will make life a whole lot easier when hooking it back up.

[DURG]

Originally Posted by jonzcustomshop

if you can, get the other end of the harness, it has a specific plug that will plug into the junction of the column harness (turn signal harness), and will make life a whole lot easier when hooking it back up.

I got this much of the harness. I think this is headed for Ebay as I am installing a completely new American Autowire harness and really don't see a flasher going in this build. Thanks for all the info guys!

http://i224.photobucket.com/albums/d...ps65deaf8e.jpg

[jonzcustomshop]

Originally Posted by DURG

I got this much of the harness. I think this is headed for Ebay as I am installing a completely new American Autowire harness and really don't see a flasher going in this build. Thanks for all the info guys!

http://i224.photobucket.com/albums/d...ps65deaf8e.jpg

oh! that's a better pic, that is all you need, you just unplug your column harness, and that goes right in between.

[jbgroby]

GMC version I installed on my '60

[DURG]

I'm going to post this in the classifieds on here.

[1963c-10]

Could have been factory ordered, dealer installed or PO installed. There are quite a few different knobs that will help narrow it down. The red knob with the 3 bowties is correct for the trucks. Heres a good pic of the correct knob on the flarestat 105

[DURG]

That is what my knob and bracket look like. Thanks.

[pimpston65]

Originally Posted by 1963c-10

Could have been factory ordered, dealer installed or PO installed. There are quite a few different knobs that will help narrow it down. The red knob with the 3 bowties is correct for the trucks. Heres a good pic of the correct knob on the flarestat 105

i have the knob type that has bout 10 white lines on the bottom side, maybe impala. do they sale just the knob anywhere?

[1963c-10]

Yes....they run around $50 from a guy on ebay. Only source ive found..may be others, just the only one ive seen. Ive got his info at work and can get it to you if you want. The pic I supplied is one of his gm cert. parts.

[1963c-10]

He has the chrome mounts also...I think he said $50 each on those too.

[pimpston65]

Originally Posted by 1963c-10

He has the chrome mounts also...I think he said $50 each on those too.

that would be awesome, i have the chrome piece. i just wanted the correct knobs. i need 2 of them badboys!!! thks for the hookup